I Can't Get the Back of My Mouse Off?
I can't get the back of my mouse off?
It sounds like for some reason the plastic is stuck. Here are a couple of things you can try ... 1) Put a **tiny** bit of sewing machine oil around the edges of the cover plate. 2) Put the mouse in the freezer (inside a Baggie) for a couple of hours or so. The cold will shrink the plastic a little, hopefully giving it enough room that it will budge. Do not sweat it too badly if nothing works, though. Mice are cheap, so if you end up having to get a new one it's not that big a deal.
------
Hp wireless mouse x4000 not working? HELP! 10 points.?
try a different USB slot, If that does not work, uninstall the mouse driver from the control panel. Just Google "How to uninstall wireless mouse driver from windows __ (whatever windows you use) and then plug the mouse back in so it installs its driver again. If that does not work, you probably have a bad mouse.
------
Why is my computer making the microsft mouse "click" sound?
for sure its no longer established because it likely did not attempt this contained in the first position. Is it a instantaneous mouse? no matter if it truly is then you really would opt to regulate the batteries and/or see if there is proper distance from the pc to the mouse. no matter if it truly is a laser mouse I say chuck it and purchase a sparkling one.
------
How to Replace Batteries on an Apple Magic Mouse
Flip the mouse over. The Magic Mouse's On/Off switch and battery compartment are both on the bottom of the mouse. Turn off the mouse. To do so, slide the circular On/Off switch that's near the front of the mouse (on a green track) down. The green track should disappear when you do this. Push the black battery cover tab down. This tab is at the bottom of the mouse; sliding it down toward the rear end of the mouse will cause the cover to pop up. If the cover does not come up when you slide the tab down, use something thin (such as a guitar pick) to pry the cover up while holding down the tab. This tab is at the bottom of the mouse; sliding it down toward the rear end of the mouse will cause the cover to pop up. Pull the cover up and away from the mouse. Doing so will remove the cover and reveal the two AA batteries inside. Remove the batteries. This is easiest to accomplish if you use your fingernails or a thin plastic object to pry each battery out by its front or back end. Never use a sharp metal object to remove batteries, as doing so will risk puncturing a battery or harming the mouse's internals. This is easiest to accomplish if you use your fingernails or a thin plastic object to pry each battery out by its front or back end. Place two new AA batteries in the mouse. Both batteries will have the ends facing the front of the mouse and the - ends toward the rear of the mouse. Some Apple mouse users have experienced issues with Duracell batteries. For best results, try to find high-quality batteries (e.g., Energizer batteries). Both batteries will have theends facing the front of the mouse and theends toward the rear of the mouse. Place the battery cover back on the mouse. You will need to make sure that the slot for the black tab is aligned with the black tab at the bottom of the mouse. Slide the On/Off switch up. Doing so will reveal a green track, and a small light in the top-right corner of the mouse's underside should come on, signifying that your mouse is on. Flip your mouse back over. Once the mouse connects to the computer, you will be able to start using it again. You may want to keep an eye on your mouse's battery life to ensure that your mouse does not die at a bad time. Once the mouse connects to the computer, you will be able to start using it again.
