This time I got 2 chief player GA87, single-mode keyboard, one black and one white, the difference in the packaging is that there is an extra RGB
Black is RGB, white is mixed light and cannot be adjusted to monochrome
These two are not hot-swappable, the shaft is welded on it, the most is to change the keycap, but for the little cuties who are not demanding, they will not change the shaft every day to play, DIY keycaps are enough up
The appearance of this keyboard is also very straight, but both the border and the corners of the keycaps have been processed, which is relatively round and does not hold hands.
It has an 87 layout and 93 keys, but it retains the numeric keypad and arrow keys, and makes the numeric keypad and arrow keys together. The function keys such as home and page are directly omitted, and the F area is closed. Added two buttons of del and nub, the size will be smaller than the full button, 38cm*14cm, the practicability is quite good
The logo is on the back, which is the upper right corner
Although it is a single mode, but on the back he still gave a switch button for mac and windows,
Three-way wireway
I brought a 2-speed tripod, and the corners are also processed, and they don’t hold hands. Why do I always say that I don’t handle them? Because I have touched some corners that have not been processed before, and the buckles are very painful.
The position of the nameplate on the back is decorated with a striped paint plastic texture similar to the shell of a trolley case
This keycap is a light-transmitting double-layer keycap, with a strong sense of light, low front and high rear,
The black is the green shaft, the obvious sense of paragraph, the trigger pressure is 60, a 15.4mm spring, the sound is crisp and clicked, and there is a slight noise of loose shrapnel
The white is the red shaft, the sound is not loud, slightly crisp, common plastic percussion sound, pressure 45, touch the bottom50
Both pressing feel a bit Q
The shell is also buckled, and can be opened by sliding along the side, which is very tight
This is the Gasket structure. There is a thick plastic plate for positioning. There are several silicone blocks fixed on the side, and there is an eva sponge underneath.
It is also an entry-level keyboard. It does not have high requirements on the shaft body. I like RGB lighting, and I like this shape and size. If you need a small keyboard, you can refer to this one.