Let’s take a look at a Douyu keyboard, the peripherals made by the game live broadcast,
If you don’t know Douyu, you should have heard of Lu Benwei,
This is DKM160, a wired keyboard with separate cable and machine, and also a typec port, with a c-port cable attached
Support hot swap,
The one in my hand is all orange, this color, the orange is very serious, it looks very pleasing to the eye at first glance,
87 keys, 36cm, very straight layout, the number keys are directly omitted, in order to facilitate you to define the keys, the keys above the arrow keys are marked with A1-A6
almost 758 grams
There are a few printed gray stripes around the perimeter of the front, it would be even better if it could be made into light-transmitting stripes
The logo is in the lower right corner, and there is a usb port on the back of the side, which is directly plugged in, without a wire slot
The back is a foot support
There are still two groove wireframes, I don’t know if it is necessary to expand the unopened mold groove
The keycap is light-transmitting ABS, which is a good point. It is also a high-low key. It feels softer to the touch, and the edges and corners do not hold hands. Personally, I still like light-transmitting keycaps. The keycap has a better sense of light. This is a backlight with 22 lights effect, the lights are also used as game area keys, qwe asd z direction keys
In addition, there is a diy Yule keycap, which is the replacement key for the betta fish theme keycap and the green axis.
The buttons have a crisp paragraph sound, the damping is obvious, the big keys are factory-run, and the custom-made satellite switches, those who like the feeling of percussion, should feel very rhythmic when playing games
The trigger pressure is 50, the stroke4
Its panel is very interesting and magnetic. It is convenient to change the case in the future, and it is also convenient to clean the dust. In fact, I really hope that the keyboard can be easily disassembled, because it is easy to lose dust, but it is very troublesome to clean.
This shell is not snap-on, there are 13 screws installed on the fixing plate,
For filling, between the positioning board and the pcb is eva sandwich cotton and the pad under the shaft, and the bottom is a layer of bottom cotton, which can reduce some cavity noise as much as possible
This one isn't wireless, so there's no battery either