Can the 60 cents Langtuhai empty shaft be able to play Ashwood V3?

There are quite a few key rings with a wolf in their name. The CIY68 of the wolf group and the ash wood v3 of the tarantula are all price-performance ratios. Can the same be true for the wolf way?

Langtu Haikong axis, this canned package and parameter stickers are a bit familiar. Go through the parameters first, the initial pressure is 40g, the trigger pressure is 42g, and the bottom is 55g, which belongs to the linearity of heavy pressure. The axis of the light blue dust-proof wall is made of Pom material, the upper and lower covers are transparent PC, with large buckles and a pentagonal axis. The total stroke is 3.5mm, and the trigger stroke is 1.6mm. The trigger and bottoming are relatively early. As for the sea and air axis, the blue is the sea, and the transparent is the sky, which is very reasonable.

All parameters are as follows:

Type: Linear Axis

Shaft material: POM

Initial pressure: 40g

Conducting pressure: 42g

Bottom pressure: 55g

Total stroke: 3.5mm

Conduction stroke: 1.6mm

The design of the transparent upper and lower covers is very friendly to RGB.

When disassembled, it can be seen that the shaft center and the guide rail are lubricated, but the two sides of the shaft center are concave, and the lubrication is not uniform, causing grease to accumulate in the middle of the guide rail, which affects the lubrication effect. The problem of lubrication, the design of the bottom of the shaft, and the influence of the PC material, so although there is not too much noise, the sound of the bottom of the shaft is still relatively scattered and not pleasant.

The spring is a 20mm double-segment spring. Due to the preload provided by the double-segment spring, although the pressure on the sea-air axis is heavy, the pressing is not tiring and the rebound is relatively strong.

The mold and spring are good, the sound is not good, and the direction is obvious. Manually apply a small amount of grease evenly on the bottom of the shaft column and the guide rails on both sides, the scattered fragments at the bottom can be largely eliminated, and the sound is much more solid.

To sum up, the price is less than 60 cents, if you want a fully transparent appearance and a good feel, the sea-air switch is undoubtedly a good choice. However, due to the limitation of PC material and the problem of factory run, it is not suitable for the sound party. If you are willing to toss, the sound can become solid after moistening.