Forwarder C65 use experience and the reality turning of the magical pen
Middle-aged people really like electronic products. The mouse at home has been changed again and again. The keyboard has only been used since the beginning of the mechanical keyboard: cherry’s black switch and red switch (when I used it for the first time, it was really I feel like my fingers are flying on the keyboard), pick up the light white pro switch (really easy to use, smooth, and this is where I think the switch body is the easiest to use), and also replaced the mute switch (wife I hate the sound of my typing sound) - mute red V3 (mute effect is good, rebound is strong), peach axis (mute is stronger than V3, but it has a rustling feeling), and I will enjoy the feeling of leaping inspiration with my hands on the keyboard , just like dancing on the stage, and at the same time enjoy the feeling of silently disassembling the keyboard "offstage", lubricating each axis, calibrating the satellite axis, and watching the video to fill the keyboard with silicone grease and cotton. Objects can be transformed by their own hands. I think this is the charm of "customization" in my opinion.
I agree with people who say "the keyboard is an input tool", so I don't like keyboards with screens. Recently, after getting AB silicone bottom pads and textured paper for the keyboards at home, I feel that my "customization" heart has returned. I was about to start moving, so I bought 3 keyboards, Forwarder C65, VGN N75, and RKR98, and planned to play casually haha.
keyboard appearance
There are a lot of evaluation articles on the keyboard at station B, so I won’t go into details here. I feel that there is no rollover problem that appears on the Internet in all aspects. The keycaps have already bought a set of MDA-height akko keycaps ( Some time ago, it seemed more than 68 yuan) But later I saw the function prompt on the keycap of this keyboard. I thought that once the keycap was changed, it would be difficult to operate, so I didn’t change it. And I think the keycap is not ugly, and the texture of the knob It's not bad, is it ugly? I don't think...but it's easy to operate. As far as the appearance is concerned, I think it completely meets the aesthetic standards of 178 yuan. By the way, I used this keyboard to type this article purely by hand.
Speaking of using experience, I would like to talk about some problems with the keyboard I saw online:
1. Front height problem: The front height is indeed much higher than the Gaussian HS108T keyboard I am currently using, and the keys of the entire keyboard are also about 2, 3mm higher.
high contrast
As far as use is concerned, I don't have any discomfort (except that I changed the space from the front to reverse), the change in height will make the edge of the space a bit cut, so I changed it. The 2-stage foot support was also used for a while, and I didn't like it very much (I usually use the keyboard without opening the foot support). This height change is from an engineering point of view, my hs108t is the hull (bottom), and the gasket structure may need more height to accommodate.
structure diagram
2. The problem of the knob: I think the high point of the knob is really easy to use, it is very comfortable to twist, and it doesn’t look cheap (of course, if the color fades later, it may feel cheap...) The scale of the knob has a sense of stage Well, the pressing feeling requires a little force, but the operation of muting is no problem with a little force, isn't it?
3. The problem of keyboard feel: I have carefully tested the feel of the keyboard many times. This is one of the most "metaphysical" problems in my opinion. It needs to be explained from multiple angles:
Soft bounce: It’s always the first time I experience a gasket keyboard. The feeling of soft bounce is not too much, but it’s really not difficult to use. The structural difference is probably “the bottom will not be so straight. , there will be a little cushioning feeling, which is not necessarily good when playing games, but for code words, because the fingers tap the keyboard back and forth quickly, this structure makes the fingers more comfortable to a certain extent.” And small If the keyboard is pure code words, it feels very good, the position of the fine-tuning is very convenient and comfortable, and the space feels good when the space is reversed.
Switch body (core): Matcha switch is also very smooth, I think it is similar to Pickup White Pro, a linear switch with light pressure, but with large keys (after my test, it seems that there are only left shift, carriage return, backspace, and space) 4 buttons) use a spring with a higher pressure, which is said to prevent accidental touches? To be honest, at first glance, I think the manufacturer is very nice and caring. In actual use, because the little finger of the left hand and the little finger of the right hand press shift and enter, the axis of high pressure will interrupt the smooth input experience at these two points, which is even more excessive. What's more, the manufacturer didn't provide 4 more light-pressure shafts for replacement. Hehe, I can only say that a small factory is a small factory for this manufacturer. . .
Sound: I really studied the sound for a while because my wife didn't like my keyboard typing sound at the time. In short, the sound is still concentrated, and the large keys are indeed at T0 level as said on the Internet, and the cavity sound is a little not obvious. That’s about it. In fact, it’s very simple if you want to reduce the decibel. Take it apart, and a layer of masking paper on the back is basically half done.
4. The problem with the pc positioning board: the positioning board will "drift" slightly up and down when the volume knob is swung hard. We can know from the picture that its own structure determines that the fixed part of the PC is the outer frame, and the keyboard itself does not have a structural positioning column.
Keyboard without positioning posts
The movable gap between the shell and the pc positioning plate is very small
Insufficient sinking of the center does have a problem with the height of the battery and the pads under the axle are against each other, which reduces the space.
The internal filling of "big cargo" is shown in the figure
Connection stability: The wireless connection will swallow the first character if it is not used for a long time (it will be activated with one button haha). There is no lag and no delay.
5 Workmanship: There may be a little bit of rush, the cushion pad on the pc positioning shrapnel was crooked, I tore it off and re-pasted it again. The free data cable is not long enough, which is probably a shortcoming! So sloppy!
Then family members, here comes the most important discovery~~~ Friends who saw the end give you a big punch! The reason for the return. . . (To be honest, I wanted to stay, but...)
First of all, I can’t use the via key change, and the customer service can’t explain it clearly. I don’t know what the jason file the customer service sent me is, and I can’t open the chat window on the Jingdong website. In short, via can’t be used, and so on! You ask me why I use via to change the key? Because the keyboard cannot use the combination of shift+esc to type the "~" character, which is a must-have character for a macho to act like a baby when I am in love! If you can’t type it out, the combination of "shift+esc" will directly enter the process management item in the web page. You must use the strange combination of "FN+SHIFT+ESC" to type the "~" character. This is not the worst part. I asked the customer service and told me that the official website can download the driver. After I went to download it, I found that it was actually a software. . .
I'm afraid it's still like this after restarting
This is what the application looks like on the desktop after installation
this. . . It's hard, brothers, the reply from the customer service after that showed the style of the small factory vividly and delicately!
Of course, in the end I finally managed to enter the via change key through strange learning, and I found out that the via change key involves keyboard editing, which is really not something for humans. This thing is like something used by programmers. It also mixes Chinese and English. It’s not recommended for brothers who don’t know how to make adjustments, it’s really too high-level “customization”, but with this thing, you can probably realize a series of code combinations corresponding to various functions of strange operations, programmers may prefer it, I really can't do it. . . The customer service estimated that I was still struggling with this as a layman and wanted me to refund. . . However, I really can't open or connect to the official driver. I don't know if there are any similar partners.
It’s good to experience a gasket at the price of 178 on JD.com. After typing this article in one go, my wrist doesn’t feel hard. I can see some of the creator’s ideas in it when I use this keyboard, and the feel is also good. Really okay! I also bought the n75. According to the current evaluation, the n75 is a bald 75v5. The structure does not have a wireless separation board, and it is not a real gasket (because there is a structure with pillars under it), so I am not optimistic about it now. The n75 is out, let’s talk about it when we get it~ domestic brands, come on!
