I heard that you are rolling out 75% mechanical keyboards? I will also participate in the first hand——RK H81

Stream saving assistant: pre-sale price 369, daily price 399, Pinxixiyou-100 yuan volume is cheaper, big key tuning is excellent, hard gas 3750mAh battery, three-mode, 2.4 storage compartments

Hello everyone, this is Pai Xiaoxing. Today I will bring you the new product RK H81 from rk. This keyboard has a good stack of materials

Yes, you read that right, this time rk has changed the outer packaging again! It is really not easy in conscience, how long has passed, it can be regarded as a new packaging.

After unpacking the keyboard and taking out all the accessories, we can see:

keyboard body

Two-in-one key puller

manual

dust cover

data line

product details

Here we must first mention the data cable of the keyboard. This time, he really designed the charging port for mac users, instead of needing a converter to use it as before. There are really not many details about this until now. A merchant can do it. (It's not that you can't do it, but you don't want to do it)

First of all, let's look at the knob of this keyboard. The knob of h81 is different from others. It is not an adjustment of the volume, but a mode switching switch. To be reasonable, this idea is a bit fun, but! This gave me the first impression that this is not the knob on the washing machine, so I went to find the picture of the knob on the washing machine, as shown in Figure 3. It cannot be said to be very similar, but it is exactly the same. leave.

Take a look at the frame of the keyboard, there is the rk logo in the lower right corner and a chamfered design around it, it doesn’t feel hand-holding, it should be said that the details of the keyboard of h81 are quite good.

On the side frame of the keyboard, a row of small calipers is designed here. Does it look good? I don't think it looks good, but it feels a little bit awkward to the touch, and for people like me who like to touch and play with nothing, this is a hand clay collector.

The power interface is on the upper left of the keyboard. At the same time, an extra hub outlet is made, which means that I plug in the wire, but I provide you with another port here, so it means that I don’t plug in the wire.

In the middle of the back of the keyboard is a metal nameplate, on which some basic information of the keyboard is printed. The storage compartment is on the right side of the back of the keyboard. There is a two-stage class adjustment foot support and four non-slip foot pads.

Summary of information on the back:

Two-stage adjustable feet

Non-slip mat*4

2.4g storage compartment

metal nameplate

The keycap is a standard two-color keycap. The spout is well handled and there is no handle. Remove the space and place it on a flat place. We can also see that the space is well handled and there is no deformation. In general, this Well done keycaps

Please enter the picture description. The keyboard switch uses TTC's colorful switch, a red-like switch, which can be lubricated. After hands-on experience, you can roughly think that it is the quality of a five-piece switch. At the same time, the switch is equipped with a light guide column as standard. The design can make the lighting of the keyboard brighter and more uniform, which is definitely a praise.

Sandwich cotton is added to the space, which reduces the cavity and makes his sound more mellow. As for the satellite axis, the rk new satellite axis is used. As I said before, the performance of this satellite axis is very good, but it is a pity that this The satellite axis cannot be purchased separately, and I hope that I can purchase rk's satellite axis separately again in my lifetime.

Pulling out a shaft, we can see that there is a pad under the shaft, and it seems that the mold has been opened again. Wait for a while and take a closer look after dismantling it.

Here you can see that this is an upper lamp position, using a patch lamp, a pentagonal shaft seat, supporting triangular shafts and pentagonal shafts, and can replace most of the shafts on the market (except some optical shafts, static capacitance shafts, etc.)

Take the keyboard apart and we can see everything inside the keyboard:

Bottom case

cover

pc fixed

pcb

Sandwich cotton

Bottom cotton

Shaft pad

Be very careful here! ! ! ! If you want to disassemble, don't pry it directly, now unscrew the screws under the four feet and then pry off the keyboard! ! ! !

The pc has a single-sided slot design, which improves the softness of the keyboard, and at the same time, there is no such situation that it cannot be stuck on the shaft.

The spacer here is the same as other gas keyboard solutions. It adopts the design of sticking cotton strips on the front and back, and there is no small design here.

The pad under the shaft has a separate hole for the satellite shaft. If there is no slot, the satellite shaft will feel a little fleshy after being pressed down, and the adjustment key is not easy to adjust.

The pcb is the most direct way to see that the position of each corresponding letter is marked (but you can’t see the characters marked on the pcb if you add the pad under the shaft and the sandwich cotton, ah hello!) and the pcb can also be seen. A grooved treatment is also to make it softer and more elastic.

The bottom uses an open-molded silicone pad. The advantage is that the noise at the bottom is well controlled, but the disadvantage is that it is hard and there is no room for deformation.

You read that right, this keyboard also has limit posts! ! If you don't like it, you can remove it directly. Anyway, I don't like it.

As for the small round dots, they act as a support

It will take less than two days to get started with the keyboard. He writes manuscripts at home on weekends and uses him for playing games. Let me tell you about my own feelings. The card slots on both sides are really easy for players like me who owe money. Dust accumulation, the overall noise control of the keyboard is very good, the satellite switch is really, really good, the ttc joint switch body performs well in terms of feel, the sound performance of printing and the stability of the 2.4g connection are from the past few days. There is no problem, the overall height of the keyboard is my personal suggestion to use it together with the hand rest, which is more comfortable, and the brightness of the light can be turned off when the light is turned off. After all, there is also the credit of the shaft light guide column and the workmanship of the keycap. And it feels good, and the big key does not have the shape of a seesaw. I think the ugly one is the knob. This one looks like a washing machine. Later, I plan to see if there is an open-source abrasive tool or draw a knob myself to change it.

The pile of materials is full, including the pad under the shaft, and the satellite shaft is slotted here, which will not cause your satellite shaft to be very meaty

The connection is stable. In the past few days I have used it, the wireless connection is very stable, and there has been no disconnection for the time being.

The large key tuning is excellent, rk’s new satellite axis big key tuning definitely belongs to the t0 level, and it can be used immediately without any tuning

The pcb and pc must be slotted, so that the keyboard deformation space is larger and softer

The sound of the cavity is well handled, the space is filled, and the bottom uses a separately molded silicone pad, and the noise control is very good

The brightness of the light is good, and the characters on the keyboard itself can be seen clearly when the light is completely turned off

There is a storage compartment, don’t keep saying I’m talking about this advantage, mainly because how many keyboards don’t have a storage compartment now

A separate hub port allows you to have one more port to accept devices

For mac users, the charging head is designed separately

The knob is ugly, it would be better to fix it

The design of the side card slot is a bit psychedelic, there is no practical use, it is just for decoration and dust accumulation

When disassembling the keyboard, pay attention to the hidden screws under the feet, blind disassembly will damage the keyboard

Hard gas limited column, also known as what gas I forgot, but for me this is not a complete gas (not to mention that the matching column is not good for gas structure, the layout of the rs2 98 keys is still the same without limit post)

Well, this is the end of the H81 evaluation for everyone. If you are interested in my manuscript, you may as well give me a follow and support, thank you.