loading

KEYCEO-Design, Manufacturing And Development Services Of OEM Keyboard And Mouse Brands.


Key Words Key Words Chapter 70: Simultaneously satisfies the three senses of vision, touch, and hearing, and may be able to share the experience of Hubatu F75 with a fever

Since last year, domestic mechanical keyboards have reached a new peak. Three or four years ago, the ceiling of the mechanical keyboard was still the big F of more than 900 single-mode wired ABS keycap shells, but now, with the best switch body and the best structure, all plus, as long as more than 399 players dare to say you Too expensive to sell, not enough sincerity.

In fact, the price of rolling costs will never end, or in other words, this direction has now reached the end, but more users actually hope to have keyboards with excellent workmanship, appearance, feel, quality, and after-sales, not just keyboards. It is a simple stack of structure, shaft body and keycap. Recently, I received this new F75 from Hubatu, which really gave me a bright feeling.

The packaging box of this keyboard continues the consistent characteristics of a certain series of keyboards, that is, it is extremely long, but it has an outer packaging length close to 98 keyboards with 75% arrangement.

The reason lies in the rich accessories inside. Like the previous H98, the F75 provides a lot as always, and has played new tricks on the accessories. The finely molded dust cover, the aviation plug-in cable with the same color as the keyboard body, the height-increasing foot support, and the shaft puller. Most importantly, a cleaning tool box was also sent this time.

There is a large brush in the box, and a combination of small brushes, mini watering cans, and shaft pullers below. Especially the specific effect of this small brush... Actually, I don't quite understand it, I feel that it can stick fine dust.

Tiger Batu F75 has four colors launched together this time, and the one I have is Furong Rouge. The whole body is purple, and the keycap is a combination of deep pink and milky yellow.

There is still a small window in the upper right corner, which can display time, power, connection mode, etc., and can also be customized through software drivers.

Moreover, the design of the volume knob this time is full of texture. The upper part is a fixed plastic plating part, and the lower part is a metal infinite scroll wheel knob. The default function is to adjust the volume.

The power switch and C port are distributed on the left side, and the switching buttons for different modes are on the right side. The whole shape is very round. Sometimes I am very emotional, the entire Fude keyboard is really willing to spend money on the mold. In particular, one of the two molds of Hubatu is more complicated than the other, and the other is more refined than the other.

In particular, I want to say that the intersection of the upper and lower cover molds of the F75 is arc-shaped, but the entire circle has no obvious cutting feel, and it feels very round.

The back is a bit of a tiger and rabbit family design, but this time the F75 is more refined than the H98, with a circle of electroplated imitation metal, and a sealed cover plate in the middle that is a little darker than the keyboard body, with this color on it The name Fleur Rouge. In English, it is - getting rich overnight, this...

On the back is the large metal LOGO nameplate of Hubatu, but press the bottom with a little force, it can be tilted up, and a 2.4G receiver is hidden inside.

Coupled with the front subtitle nameplate that is simulated as rabbit ears, I have to say, no matter how you look at its appearance, this is the most exquisite mass-produced keyboard I have seen in recent years.

After talking about the appearance, the keyboard is still used in the final analysis. Plug in the 2.4G receiver, turn on the switch, and the small screen lights up.

In fact, I have seen a lot of keyboards with screens recently, but I don’t have much novelty and desire to play with them. However, the screen cover of the F75 is slightly raised, which feels like a drop of water.

This keyboard unsurprisingly uses the Gasket structure. Although it is unsurprising that it uses the most commonly used full silicone padding for mass-produced keyboards, it actually feels soft and elastic to the hand.

The shaft uses TTC's latest high-speed rail shaft - the Uranus shaft. This shaft adopts a brand-new appearance and internal guide rail structure. How should I say its hand feeling is very smooth.

The shafts we have used before are nothing more than lubricating the shafting, guide rails, and small feet, but the two shafts of the high-speed rail type are very comprehensive. The entire shaft center is fully lubricated, and the bottom of the spring is also lubricated. The resulting effect is that firstly, it feels very smooth, and secondly, the bottoming sound of this shaft body is not loud and very nice.

And I don’t know if it’s the difference between the switches or because this keyboard will come out later, this Neptune switch feels smoother than the Venus switch I used at the beginning of the year, and the friction sound when I put it on my ear is also smoother. a little better. I guess the TTC is also gradually optimizing the technology of the high-speed rail shaft.

In addition, this set of shafts has a condenser, so although the filled silicone used by the F75 is all dark gray, and the upper light position is designed, the brightness of the overall RGB backlight is actually acceptable.

Compared with the previous version, the keycap part has also been optimized to a certain extent. What is more characteristic is that there are three small bumps in the positioning blind spots of F and J, which is a relatively rare design. The touch of the surface is delicate, and the whole height is still very comfortable, and I don’t feel tired after typing for a long time.

The PC positioning board is slotted to make the feel softer.

The driver aspect has been mentioned on the Hubatu H98 and other similar keyboards before, and the software level of this small screen of his family is relatively complete.

It is impossible to have a keyboard that can satisfy everyone's preferences and needs, but as a mass-produced keyboard, the F75 has achieved a relatively high level in the three items of handle, appearance and even sound. The design is complicated but not messy, and the feel is light and soft, including the adjustment of the large keys this time, which is quite good. If you want to talk about the disadvantages, it would be better to add an under-axis pad, and such a complicated keyboard is equipped with TTC's high-speed rail-type axis body, which is not cheap at all. The price of F75 will also be slightly higher.

The author declares that there is interest in this article, please respect the author and the content shared, communicate friendly, and make rational decisions~

GET IN TOUCH WITH Us
recommended articles
Capability Mold making Silicone molding
no data
CONTACT US
DONGGUAN KEYCEO TECH CO.,LTD 
Cell Phone/QQ/Wechat: 
+86-137-147-55740
Skype: rachel-comptuer
No.1,factory building, Tangkou, Miaoyi, Miaobianwang Village, Shipai Town Dongguan
STAY CONNECTED
              
Copyright © 2024 keyceo.com  |   Sitemap
Customer service
detect