Keyboard Part 7: Jiadalong low-axis series 2.0, the second spring of low-axis keyboards! Digging for spring treasures, Jiadalong short red axis.

Jiadalong should be regarded as the earliest short shaft in China, and it has been equipped with mass-produced products such as Nuphy very early. Although the low-axis keyboard has been around for many years, it is still tepid. In the past two years, the low-axis keyboard has really been brought up. I think it is still Nuphy.

The design that combines compactness, portability, good looks and playability is indeed very attractive. In particular, I have seen many girls around me use this keyboard. It is a good thing for girls in spring. The only disadvantage is that it is a bit expensive.

Recently, Keychron's low-axis keyboard also uses Jiadalong's 2.0, which is one of the few 68-type low-axis keyboards, which is very suitable for girls. Just got 10 Jiadalong short red axis 2.0 in the lottery, let's take a look.

The packaging is in the same line, even the cover is the height of a conventional shaft body, this wave is not very detailed.

The material should be the old three of PC, POM and nylon. The axis of the dustproof wall has a little square extension on both sides. I don’t know why it is considered, is it stable? But it doesn't seem to work. The conventional cross axis is compatible with ordinary keycaps. I tried it, and the regular OEM height does not get stuck on the keycaps.

The bottom is three-legged, but the stitches are one horizontal and one vertical, so it can only be compatible with Jiadalong's own shaft seat.

The upper cover of the small buckle and the shaft opener of the MX shaft cannot be opened. However, the buckle is very loose and can be lifted off with tweezers. There is a little gap between the upper cover buckle and the bottom case. I don’t know if it’s designed like this or it’s not done well. It always feels a little loose.

There is a very small piece protruding from the center of the shaft, which is used to push the shrapnel to trigger. This protrusion is a little higher than the side wall, so in order to prevent it from touching the bottom case in advance, a small hole is made in the bottom case.

Double-segment spring, the axis column has a certain amount of lubrication. There are also small holes for ventilation at the bottom, a bit like the practice of sea wood, to prevent the sticky feel caused by thick grease.

Next to it is the shrapnel placed horizontally, and the moving piece is bent, a bit like a BOX? The space next to it is reserved for the sound-generating structure of the blue axis, and the light hole also gave way, resulting in a crooked opening.

The axis is quite stable, and the smoothness is not bad, but it doesn’t feel top-notch. It may be a bit like the position of the Jiadalong G red series. The retail price is 2 yuan each. At present, low-axis products are still more meaningful to match with mass production. You can change it for fun after buying a low-axis keyboard.

This spring is also looking forward to more low-axis products, especially hope that there will be a low-axis kit, which will truly rejuvenate the second spring of the low-axis keyboard.