Quiet and crisp sound, light and compact - K3 bluetooth mechanical keyboard made by Jingdong

#ZEALER Public Test#

Everyone has a different opinion about mechanical keyboards, but everyone agrees: too loud for quiet use. So today, I will bring you the K3 Bluetooth low-axis mechanical keyboard made by Jingdong.

First of all, due to the epidemic, we only got the event in July in July, but there is a saying that "a good meal is never afraid of being late".

Secondly, I would like to thank the ZEALER App and the ZEALER public beta activity for giving us this opportunity, and presented the K3 wireless mechanical keyboard made by Jingdong as a gift, so that I can have a glimpse of it.

The size of the K3 is 306*116*22mm, 484g (less than a catty), very thin and portable, and can fit in a normal backpack.

The battery has a capacity of 1550mAh, which can be used continuously for about 35 hours. At the same time, it can be charged with the Type-C interface, which is convenient and quick for battery life.

family portrait

First of all, through the family portrait, we can see the whole picture of this product:

Keyboard body × 1, key puller × 1, USB data cable × 1, instruction manual × 1, keycap × 5 (for MacOS), and a manual to tell us how to use the keyboard just got it.

K3 adopts an 84-key layout, which is the same as that of a notebook computer, making it easy to use. The function keys are combined with the multimedia keys and switched by the Fn key.

Connect with Mi Pad 5Pro

K3 supports MacOS and Windows dual systems, and also supports iOS and Android systems, which can be said to be a small expert. It can match 3 devices at the same time, only need to switch through Fn+1/2/3.

white light mode

This time I got the white light version, but there are also rich lighting effect modes, a total of 17 kinds, and I will show you a few of them here.

Only these three videos were uploaded due to article limitations.

K3 can switch the system through the toggle switch on the back, and can also adjust the wired/Bluetooth 5.1 mode, and connect to the computer through the Type-C data cable.

According to the official website, the shaft body used by K3 is Jiadalong short shaft body, which is 6.2mm shorter than the traditional shaft body, which also makes the height only 22mm at the thickest part of the open support, which is very light and thin.

At the same time, the tea shaft is used, which has a soft feel, low sound, and a slight sense of paragraph, which is suitable for most users. I am typing this article in the self-study room and I am not afraid of affecting other people's learning to write questions.

The keyboard is designed with an ergonomic angle, using a two-stage foot support design, providing 3 different use angles, from 6 degrees to 9 degrees, choose your most comfortable support position.

Throughout the exterior, manufacturer details can be seen:

The main body of the keyboard uses two different grays to enhance the distinction; at the same time, the Esc key, the independent light key, and the two toggle switches all use bright orange, which forms a strong contrast with the main area of ​​the keyboard.

The only fly in the ointment is that the keycaps are a little oily after writing the whole article, but it is not a big problem and it is acceptable.

So much for the above evaluation, thank you for reading, if you have any questions, please leave a message in the comment area.

Thanks again to ZEALER App for its strong support for this public testing activity.

I'm WeiRicardo, a computer student who loves digital.

The author declares that there is interest in this article, please respect the author and the content shared, communicate friendly, and make rational decisions~