Mechanical keyboard + wireless + RGB, which belongs to the highest level configuration of mechanical keyboard. However, due to power consumption and cost reasons, there are not many brands that do this kind of configuration of mechanical keyboards, and most of them are mainly wired mechanical keyboards without lights. As for the light factory Razer, which is full of faith for every boy when he comes into contact with the computer, he has been deeply cultivating in this direction. Now Soul Eater Golden Scorpion has launched a new V2 version. The configuration of short axis + RGB + wireless is in the heart of every boy. The Light of Faith has been upgraded again.

As the lighting manufacturer of Razer, the latest new products are continuously updated one after another. After ten years, the Soul Eater Golden Scorpion series V2 wireless version is launched again. It is a top-notch mechanical keyboard. Razer uses the The self-developed low-profile switch ensures the tactile feel and feedback of the keyboard while being minimalist and thin.

The appearance of the V2 wireless version does not refer to the style of other Razer keyboards. It adopts a frameless design and no wrist rest. It does not have the wide and rough feeling of gaming keyboards. , but still young boys at heart.

The American layout with 104 keys and small return is adopted, and the position of the ordinary keyboard light is replaced by two multimedia keys.

The two multimedia keys in the upper right corner of the keyboard are highlights, one is a round key and the other is a cylindrical roller. The round button is the play/pause switch, pressing twice is the next song, three times is the previous song, and the dial is to increase or decrease the volume by turning up and down.

The biggest advantage of the multimedia function keys is that adjusting the volume can be done blindly, and listening to music is also much more convenient. These two keys are worthy of praise.

The buttons adopt a floating design, each button looks lighter and thinner overall, the gap between the buttons is easier to clean, and the exposed shaft body of the suspension has better light transmission. With Razer's "Light of Faith", every press is very exciting. feel.

The slightly protruding part on the back is the battery compartment of the keyboard, which can guarantee 40 hours of long-lasting battery life. Of course, this slightly protruding design is also very interesting. It acts as a heightening pad on the upper part of the keyboard. posture, feel more comfortable and reduce fatigue.

If you want the keyboard to have a higher inclination angle, you can also use a special two-stage design foot support, and the degree of the foot support is also intimately marked-6° and 9°.

We can adjust the inclination of the keyboard according to our daily usage habits to improve comfort, and the three heights are suitable for most people.

There is also a small box on the back that contains a 2.4G wireless receiver. According to the official announcement, it can support 5 HyperSpeed ​​devices at the same time. The biggest advantage of HyperSpeed ​​wireless connection is to allow multiple devices to use the same receiver, freeing up the already stretched USB on the computer. Port, especially notebook users need this more.

On the front side, there is a switch between 2.4G and Bluetooth, which allows the keyboard to switch between HyperSpeed ​​wireless connection mode and Bluetooth mode. Three physical buttons allow the same keyboard to switch between three devices; then there is a type-C The charging port is now available. This port can be used as both a charging port and a wired connection, giving the keyboard an additional connection method.

After talking about the whole, let's talk about the details. First, the keycaps. Although it is a floating keyboard, the keycaps are much shorter, but unlike the flat touch of a notebook keyboard, it still has a certain curvature and is very comfortable to press. The surface of the ABS material adopts oil-resistant coating and laser etching process, the keycap will not be shiny after long-term use, and the wear resistance of the letters is also greatly improved.

Disassemble the keycap, and you will find Razer's self-developed optical short switch. The short key stroke is shorter and the trigger speed is faster. Because it is triggered by light, it will be more sensitive than the traditional switch. The trigger stroke of my linear red switch is 1.3mm, and the trigger force only needs 45g, which is very light but tough. The rebound feedback is not procrastinated, and the overall feeling is very refreshing. Playing games will feel more comfortable and fast. It is also easy to use for long-term coding, and the sound of pressing is not loud, and there will be no such "crackling" sound. , has less impact on the surroundings, and can be used in office scenes or staying up late at home.

Finally, let’s talk about the lighting. The RGB lighting effect has become Razer’s signature. The “Light of Faith” is not called for nothing. The color of the light can be adjusted through Thundercloud. There are 16.8 million colors. You can change it as you want. The snake's logo green is really impressive. The light from each keycap is very uniform. Even if the brightness is adjusted to a low level, the letter display is very clear. With the ambient light of the mouse, it is placed on the desktop. The keyboard is full of ritual.

An excellent keyboard must be paired with an excellent mouse, and Baselis Snake V3 is a good choice. Its excellent feel, smart scroll wheel and colorful lighting effects complement each other when paired with Soul Eater Golden Scorpion V2.

The appearance of the right-hand ergonomic design, the arc of the mouse is not too high, the lines are rough and tough, with the usual style of Razer, the big Razer LOGO on the back is very conspicuous, especially at the moment when the light is on, the mouse is very recognizable high.

Through software adjustment, the scroll wheel light, LOGO light, and the 11 magic light areas in the lower circle can be matched with the keyboard, main box, etc. to form a color, and the overall atmosphere is very good.

There are two programmable side buttons on the left side. I generally like to set it to copy and paste. It will be much more convenient to write. There is also a sniper button. What is it for? When playing games, pressing the sniper button can reduce the DPI value and reduce the shaking caused by the mouse when aiming. With it, who am I afraid of when playing chicken! The covered rubber side skirts feel very stable when touched by the thumb. My hands are sweaty and a little oily, so I won’t feel slippery when I hold them for a long time.

The one behind the scroll wheel is to switch the scroll wheel mode, and the other is to switch the DIP. With the FOCUS+ sensor, 26000DPI, and colorful lights, it is worth the money.

The Razer Soul Eater Golden Scorpion V2 wireless version not only takes care of the needs of gamers for keyboard comfort and RGB, but also takes care of the belief of some office-oriented old boys in the light factory.

I have to say that besides the cool appearance and powerful technology, the things of the lamp factory can not only improve the gaming experience/work efficiency, if you are also a fan of Razer, if you just need a wireless RGB mechanical keyboard, then it It is worth trying, and Baselis Snake V3 is a good recommendation for both gaming and office work.

The author declares that there is interest in this article, please respect the author and the content shared, communicate friendly, and make rational decisions~

Hey, I'm moresure~

It’s been a long time since I updated the keyboard and mouse combination. Recently, I bought a set of equipment for my roommate, which is convenient for her to use for work and leisure every day. As a young woman, I don’t know much about the performance of the equipment. If you ask me, it’s a good brand, good-looking, and doesn’t need to be fancy. If you don’t have to worry about the functions, you don’t have to worry about it, so I helped to buy these devices. At first, I wanted to see what kind of keyboards CHERRY has. Later, I found out that CHERRY also has a mouse and earphones, so I just took advantage of the opportunity. It may not be the best solution to start with a set, but it definitely makes up for some gaps in my understanding of digital products~

I have to say that the naming of CHERRY is really confusing. If you don’t carefully compare the differences between the names, it’s really hard to distinguish the model. I recommend a big mouse for office desktops. CHERRY MC 1.1 plus is a model with good looks online. It is white all over and has a three-zone lighting system, which is simple and beautiful. Why no wireless mouse? First of all, the roommate has no experience in using high-end mice, and there is no requirement for the feel. I think that if the gaming wireless mouse is turned on RGB, it needs to be charged at least twice a week. I don’t want to hear any complaints about the battery life in the future. In addition, in terms of stability , the wired mouse is always stronger than the wireless one, the function is simpler, no drive plug and play~

In terms of performance, CHERRY MC 1.1 plus supports up to 6200DPI sensitivity, 220IPS tracking speed, 30G acceleration, 1000Hz return rate, lighting supports breathing, monochrome, cycle, rainbow and other modes, and the buttons support customization, which can be quickly set through the driver. The overall function is relatively comprehensive.

As a large mouse, CHERRY MC 1.1 plus performs very well in terms of grip. When held normally, the palm part can be completely attached to the mouse, which makes it easier to use for a long time; the pentagonal dot matrix design of the side skirt is relatively non-slip Worry about the paint falling off; the CHERRY MC 1.1 plus button press feedback is very crisp and quick to respond, which is great for office work or games.

Friends who are familiar with Cherry should be more familiar with MX2.0S. Many of my classmates use it. Of course, in terms of subdivision shafts, colors, and functions, there are many choices for MX2.0S. I use it here. The white version of the mouse has no lighting system and supports three-mode connection. In addition, there are official Pikachu and Geng Gui customized models. If you are interested, you can search it~

MX2.0S is one of the few non-rigid mechanical keyboards on the market. It does not use a positioning board to stabilize the shaft body, but directly welds the shaft body to the PCB board, and the outer shell is made of plastic material. When looking at the keyboard, it can be clearly felt that it is lighter than the average mechanical keyboard. Since there is no light on the keyboard, you don’t have to worry about battery life when you use it wirelessly. Its built-in battery has a capacity of 2800mAh, and the official announced battery life is 200h.

Another interesting point that many people will not notice is that the MX2.0S supports vertical placement, and the front and rear sides can stand on the desktop. Roommates usually take notes, do some manual work, and put the keyboard upright. , and the desktop space is available, great!

Like CHERRY MC 1.1 plus, MX2.0S has an all-white body, and the color difference between the two colors is invisible to the naked eye, and the visual perception is relatively uniform.

MX2.0S has red switches, brown switches, black switches, green switches and other axes to choose from. After the initial firing stage, I personally recommend red switches and brown switches. The trigger pressure of both is relatively small, and the noise is ok. Neglect, the difference is that the red switch does not have a sense of paragraph, the tea switch has a slight sense of paragraph, and the position is higher. If you usually type a lot, the trigger of the tea switch is more clear. This keyboard achieves an extremely fast response of 1ms, and there is no problem in playing games at ordinary times.

Other functions such as button customization and macro commands can be adjusted through the driver software. If the requirements are not high, just plug and play.

The design of the CHERRY HC2.2 gaming headset is also very simple, but the white color is warmer and belongs to milky white. The head beam shell of the headset is made of PC, which is made of fine frosting technology, which is more durable; the shell of the earmuffs is made of silicone The material has a certain damping feeling to the touch, and the entire shell can be pressed, and the buttons on the top are all raised, which is more convenient for blind operation.

Just looking at the appearance, I think CHERRY HC2.2 is just an ordinary headphone, which has nothing to do with e-sports, but in fact, it supports Dolby 7.1 surround sound, and the sound units on both sides reach The diameter is 50mm, and the frequency response range is 20Hz-20KHz, which can be said to have both software and hardware qualities.

CHERRY HC2.2 is equipped with a detachable noise-canceling microphone with a pop-proof protective cover, which can be adjusted freely. Although the entire headphone body is made of PC, silicone and other materials, the color is still very uniform.

In terms of wearing, because the head beam of CHERRY HC2.2 is made of skin-like silicone material, it feels much thicker than protein leather, and it is smoother to wear. The earmuffs are made of PU leather, and the inner sponge is relatively soft. The feeling is between protein leather and fabric earmuffs, with good ventilation and not too stuffy.

The mouse pad I chose is 900*350*4mm. The fine suede is made of smooth weave. It is very silky to move the mouse, and it is water and dirt resistant, and it is easy to scrub. Officially, there are also thick suede, patterns, and different thicknesses to choose from. I prefer the simpler ones.

In terms of workmanship, it is naturally the best among mouse pads. The edge is fine and does not pill, and it is not easy to fall off. The back is made of thick rubber material, with non-slip texture, strong stability, not easy to deform, and ready to use out of the box. Although the mouse pads of Taobao 20 or 30 are cheap, the edges are very easy to break and pill, and they will become dirty after a month or two. However, the mouse pads of CHERRY have passed the SGS certification, with high-quality raw materials, easy cleaning and long service life.

The roommate is very satisfied with the appearance of this set of equipment. Of course, she doesn't understand if she talks too much. You said that the excellent experience that is difficult to learn is provided by digital products, or is it provided by me who understands digital products? hee hee~

Hi, hello, here we come.

Let’s take a look at a new product recently launched by ROG: Ranger NX wireless keyboard.

This keyboard is equipped with ROG's self-developed NX axis, which is ROG's second self-developed axis after the RX optical axis.

Today's article mainly explores two parts.

1. Is the NX axis developed by ROG still as good as the RX optical axis?

2. What are the differences between gaming keyboards and customized keyboards in terms of design and functional focus?

The appearance of the Ranger NX is still the appearance of a gaming keyboard from a big manufacturer, which is unremarkable. .

Black plastic bottom shell and dark gray aluminum anodized metal cover, with fully transparent switch body and ABS keycap, the lighting effect is very good even in the daytime.

The surface of the magnetic palm rest below is PU leather, and the interior is filled with sponge. It comes with a certain ergonomic inclination, which is soft and can provide a certain support when typing so that the hands are not so sour.

A mechanical keyboard with a palm rest or without a palm rest is completely different. If you haven’t bought a palm rest, remember to buy it this Double Eleven.

Just buy this kind of soft leather, which is comfortable and cheap to put your hands on, and you don’t feel bad if one of them breaks for more than ten yuan.

The keycap of this one in my hand is made of ABS material, which may be a slot.

But if you know about ROG keyboards, you will know that ROG keyboards have always been divided into two versions: ABS and PBT.

The lighting effect of ABS is better, and the ability of PBT to resist finger oil is better.

Buy ABS if you like lighting effects, and buy PBT if you are afraid of oily keycaps. Give users the right to choose, I think ROG is doing a good job.

Put two pictures of the lighting effect of the keyboard, ROG old lamp factory.

Even on the H610M motherboard, ASUS provides RGB interface, ASUS is obsessed with lights.

ROG launched a total of three colors for the NX axis this time.

They are: NX Hawthorn Red, NX Mocha Brown, NX Glacier Blue. Each corresponds to the classic red axis, tea axis, and green axis.

The shaft uses Kaihua's solution and does not support hot swapping. Designed with a fully transparent shell and printed with the ROG Logo, the light area is made with oblique cut lines to soften the keyboard light and prevent glare from the light.

The one I got is the NX Hawthorn red switch body. You can tell from the appearance of the cross axis that this time the NX axis is aligned with the Cherry MX axis.

The tapping feel is also very similar to Cherry Red switches, but the second half of NX Hawthorn Red will be heavier and smoother than Cherry Red switches.

However, in terms of smoothness, NX Hawthorn Red is still a bit inferior to the current domestic high-end linear switches, and even incomparable to ROG’s own RX switches.

After all, this is the first time that ROG has made a traditional mechanical axis, and this performance is also understandable.

In terms of feel, give it a passing grade. After all, the goal is Cherry, and the feel is stronger than Cherry.

If you want to pursue the ultimate smoothness, it is recommended to add money to the RX shaft. The shaft structure of the RX is a completely non-contact design. It is difficult to surpass the smoothness of traditional mechanical shafts.

However, in terms of sound, the performance of this ROG NX axis body is not satisfactory.

Not only is the percussion sound not HIFI at all, but there will also be some weak spring sounds on the shaft during continuous percussion.

As you can see, this keyboard does not have any sound-absorbing structure between the upper cover and the PCB, so there will be some cavity sound when the big keys are struck.

In short, if you care about the sound performance of the keyboard, then all the current ROG keyboards are not suitable for you.

Not only ROG, but the sound performance of keyboards from major peripheral manufacturers such as Razer, Logitech, Corsair, Cherry, and SteelSeries is also inferior to the current domestic keyboards.

Many games like to set squat as the Ctrl key, but I think the Ctrl key on the keyboard is too small to press. They all change the squat in the game to the C key. I don’t know how many people like me have changed it like this .

ROG changed the small Ctrl into a large Ctrl, Ctrl Plus this time.

Not only has it been enlarged and widened, but the axis body has also been changed to a satellite axis design, which actually turns Ctrl into a big key.

Gaming keyboards should be designed to be optimized for games. Unfortunately, I am used to squatting on the C key, so I can't use this function.

But if you are still squatting with Ctrl, then you must like this big Ctrl, it is very cool to press.

Finally, let's look at the disassembly.

I still don't recommend you to disassemble the keyboard by yourself, because there is a screw under the sticker, and you need to tear off the sticker to disassemble it.

There is a small piece of sound-absorbing cotton on the bottom of the keyboard, which makes the cavity sound of this keyboard smaller than other ROG keyboards, but there is still a little bit when hitting large keys.

Inside the shield under the sound-absorbing cotton is the battery, the supplier is from Zhuhai Guanyu, with a capacity of 4000mah.

I suspect that this battery is a stock of a mobile phone battery, and the battery connectors are BTB connections commonly used by mobile phone batteries.

The actual measurement turned off the battery power saving mode, turned on the light, and used a 2.4G connection. After 5 consecutive days of high-intensity use, there was still 58% of the battery left.

Official endurance data:

Bluetooth mode to turn off the light: 316 hours

Turn on the light in Bluetooth mode: 78 hours

2.4G mode off lights: 315 hours

Turn on the light in 2.4G mode: 60 hours

Then look at the motherboard, ROG did not integrate the main control and wireless chips on the keyboard PCB like domestic keyboard manufacturers, but opened a small board separately, and there is a small spring on the small board as a buffer.

Around the wireless chip on the right side of the motherboard, there is a separate coaxial signal cable connected to the keyboard shell, which transmits the wireless signal to the shell antenna.

Such a separate antenna design can greatly increase the signal strength and transmission stability of the keyboard in wireless mode.

The wireless chip adopts Texas Instruments CC2642, which is a wireless chip designed for automobiles, but ASUS uses it on the keyboard.

48MHz Arm M4F processor, 352KB RAM, 256KB ROM, support low-power Bluetooth 5.2 and 2.4G wireless connection.

Although this time the Ranger NX is not equipped with ASUS's latest SpeedNova ultra-low latency wireless protocol. But the performance of this chip and the independent external antenna design make the wireless experience of this keyboard very good.

Surrounded by 7 2.4G frequency band devices on my desktop, I haven't seen any word loss in the past few days, and I don't notice any obvious delay.

In the center of the small board PCB is an ultra-low-power MCU from STMicroelectronics, which is guessed to be the keyboard master.

80MHz Arm M4 processor, 40KB RAM, 80KB ROM.

The storage IC next to the MCU comes from Shanghai Fudan Microelectronics.

The capacity is 32Mb, which is responsible for storing the settings of the keyboard's onboard lighting and shortcut keys.

At first I saw the silk screen on the IC and thought it was 32KB, but after checking the parameters, I didn't expect it to be 32Mb. This is the first time I have seen this kind of large-capacity storage IC on peripheral products.

There is also an IC with the silkscreen of CUECYE on the small board. I can’t find any relevant information. I guess it is a power management chip. If you know it, you can add it in the comment area.

Read the complete disassembly of the keyboard, even if I don’t tell you, you can find the difference in design and function between the gaming keyboard and the customized keyboard.

The pursuit of customized keyboards is the feel and sound of the keyboard, so you can see that the current domestic customized keyboards are all adjusting, moistening the axis, and eliminating noise. To achieve a better feel, more pleasant percussion sound.

The gaming keyboard is designed with the keyboard as a gaming peripheral, in addition to the basic feel to ensure that every tap during the game can be triggered stably and accurately, and it can also respond smoothly and quickly when connected wirelessly.

As for how to choose, I think you should already know the answer.

If you are looking for feel and sound, choose a domestic customized keyboard.

Now the market where everyone is crazily rolling is your paradise. The sound-absorbing structure of a keyboard that used to cost thousands of dollars can now be bought for only a few hundred dollars.

If you want to use the keyboard as a gaming peripheral, you want a more stable wireless experience, longer wireless battery life, better driver support, and richer lighting gameplay. If you want these features, you have to choose a wireless gaming keyboard.

The author declares that there is interest in this article, please respect the author and the content shared, communicate friendly, and make rational decisions~

I am working now, and I cannot do without my computer. The keyboard is a necessity for my daily work. Whether I work in the office or at home, I hope that my keyboard is good-looking and easy-to-use. And this time the Pennefather MT510PRO keyboard directly hit my heart from the appearance!

The first is the outer packaging of the box, which is different from the blue packaging of Rapoo in the past. This time, the packaging is colored, which directly matches the color of this keyboard of Rapoo. On the blue-gray background, we can clearly see the color of the keyboard. One thing to say, this color scheme looks very comfortable.

Open the package, take out the keyboard, and fall in love at first sight is my mood at this moment. This MT510PRO directly abandons the design of the numeric keypad, and the entire alphabetic keyboard forms a complete whole. For me, I don’t use many small keyboards. This keyboard just discards the parts I don’t need, which is very good.

What I like most about the Rapoo MT510PRO is the color matching and keycap design of this model. The color of the main letter area is a white keyboard, so that no matter what the light is, it can basically be seen clearly (although I am already in the state of touch typing). The keycap is designed with a circle of gray ocean patterns around the letter area. The enter key is Lun Chuang in sailing, the retract key is a fish swimming around, and the space bar is a big swordfish and the corresponding letter logo. The outer circle is a dark blue keycap design, including the arrow keys and some other auxiliary keys. The patterns on the keycaps are also quite interesting, police hats, nautical lighthouses, sunrise and sunset...

The Rapoo MT510PRO keyboard adopts two connection methods, wireless and wired, so there is a switch button at the bottom of the keyboard. Regardless of whether it is wired or wireless, the switch must be turned on when using it. Using the cable may not have a big impact on the power, but if you use a wireless connection, I personally recommend turning off the switch when the keyboard is not in use, which can save power.

The four corners at the bottom of Rapoo MT510PRO are designed with non-slip pads, and the height of the four corners is the same, so that the keyboard can be firmly and stably placed on the table when in use. And under the non-slip top, the design of the keyboard is designed to increase the height. There is one thing to say, the MT510PRO itself is a bit taller than ordinary keyboards, so this height-increasing design is basically useless when using it. The key point is that all the mats are designed with soft rubber and have anti-slip textures. They are beautiful and practical, and people like them.

There are two ways to use it wirelessly. One is to connect the receiver to the desktop, which is the basic mode I am using now. As a social animal, my daily work is to type the keyboard on the computer. A good keyboard is the guarantee of my work happiness, so now I use the MT510PRO keyboard for office work every day. Another reason is that the keyboard provided by the company is not so satisfactory to me. Since it is a peripheral product for my office, then of course I choose the keyboard I like.

The connection method used by the desktop is also very simple, directly plug the receiver into the USB port of the computer, and the system will automatically install the keyboard driver. After the automatic installation is complete, the keyboard is ready to use.

The data cable of the Rapoo MT510PRO keyboard is packaged in black and comes with a strap. Personally, I think this design is quite good. When you need to use the cable, you can directly open the strap. When you don’t need to use it, the cable will not be messed up because of the absence of the strap.

The way of wired use is relatively simple. There is a type-c interface reserved on the top of the MT510PRO keyboard. When using wired or charging, just plug the data cable into the keyboard and connect it to the computer.

When charging, you can use the color under the space bar keyboard to distinguish whether the battery is sufficient. When the MT510PRO keyboard is charging, the color under the space bar is red, and the light color is softer, which is not dazzling. After the charging is complete, the red light goes out, and you can see the light effect that comes with the keyboard itself.

Speaking of the light effect, the light adjustment method of MT510PRO is: Fn+Ctrl+R. After the keyboard is turned on, the light will appear. If you don’t like the light effect, you can press the button to select it. The available light modes are: ripple mode, constant light mode, single light mode, breathing mode, starry mode and curve mode. There is one thing to say, the place where I work is very well lit, and I don't care about any mode.

As a mechanical keyboard, this MT510PRO also impresses me because the keycaps can be replaced. The plugger that comes with this keyboard is relatively small and tough. When replacing the keycap, you can directly press the main keycap of the card to remove it. Overall, the keycaps are still very easy to replace. However, the main premise for me to replace the keycaps is to find the keycaps I like more, but as far as I am concerned, I still like the appearance of the keycaps of the MT510PRO, and I am not going to replace other keycaps for the time being.

The axis is the cross gray axis, typing is very easy, and the fingers will not feel tired when typing on the keyboard. Another thing I like more is that this switch is a silent switch, and there is no sound exclusive to mechanical keyboards when typing on the keyboard. It is still very good for use in the office. After all, I am not the only person working in the same office, and I like to knock on something during everyone's lunch break. The silent switch is really YYDS for the workers.

Seriously, the small keyboard is too friendly for small hands. As a person with small hands, although I am used to touch typing on the keyboard, I always feel that the large keyboard is still a bit too big to use. The overall design of this MT510PRO is very suitable for my needs. It looks small and cute, and it will make people feel very suitable when working on the keyboard. At the same time, I don't like the overly complicated desktop, because the keyboard has become smaller and there is a lot of space, and it also makes people feel comfortable when working!

There is one thing to say, I want to take this keyboard with me when I go out. Although its size is very suitable for taking out, the weight of the whole keyboard makes me a little daunting, so this MT510PRO has directly become my office exclusive keyboard.

As a multi-function keyboard in all-in-one mode, although I have used it to assist me in office work for a long time, when I go out occasionally, this MT510PRO paired with a tablet is also a very useful choice. After all, you only need to turn on the Bluetooth connection to connect to the tablet, and the Bluetooth connection method is simpler and more convenient than the receiver: turn on the Bluetooth mode and connect to the tablet Bluetooth!

Sometimes when you are away from home and you need to type text temporarily, the small keyboard is a very good choice. Small means that it does not occupy much space. It can be placed together with the tablet in a backpack. When using it, it can be connected to the keyboard by opening the tablet, which is very convenient.

In fact, the most important thing is the cool feeling brought by the high value of the MT510PRO. After all, when you are sitting in a coffee shop and using a tablet and need to type, a high-value keyboard is still very cool to use, isn’t it! This MT510PRO is very comfortable for me to use. I don’t feel tired when typing, and I don’t have to worry about disturbing my colleagues who are working around me when I’m silent. I can take it out and connect it to a tablet or mobile phone anytime, anywhere. Who wouldn't like such a lovely work partner!

The keyboard at home accidentally knocked over the water glass last week and it broke. As a productivity tool for programmers, without it, it is really difficult to enter the working state. The keyboard that comes with the notebook does not work well. Feeling, so I bought the best mechanical keyboard of the year-Dareu A98 Pro three-mode mechanical keyboard.

After receiving the goods, I feel that the color is more attractive than the picture, with a small and fresh feeling, and there is no common fault of domestic keyboards. The keyboard adopts a 98-like layout, with a numeric keypad, and a total of 97 keyboards with RGB backlighting.

The weight is 1240g, and it is still very stable on the table. There is a color display on the right side of the ESC, which can display pictures or animations, as well as functions such as power, capitalization, etc., which is quite interesting.

A98pro supports three connection methods: Bluetooth 5.1, wired and 2.4G wireless. After use, wired and 2.4G wireless respond faster, and Bluetooth will be a little slower.

Due to the use of Dareu's latest sky axis V4 linear axis body, which supports 80 million taps, the pressure does not need to be too hard, the feel is soft and comfortable, and the sound is nice and crisp.

After experiencing it for a week, I feel that the A98pro really lives up to its reputation. It is not too much to say that the ceiling of the domestic mechanical keyboard is not too much. It really makes me feel amazing! Although the price is high, such an excellent product seems reasonable. I hope it can be used for 5 years. If it can be sold on salted fish after 5 years, it will really be worth the cost price!