Recently, customized keyboards are more popular, so I also bought a lot of kits and assembled a few customized keyboards with the feel and appearance I like, but the so-called customized keyboards are all made up of parts from small workshops. At the same time, the user experience is not so perfect. Either the battery life is not good or the signal is weak or there is a delay. After tossing and tossing, there is no keyboard that can meet all my needs at once. So I turned my attention to the finished keyboard, and I found this Lofree 1% Bluetooth mechanical keyboard, transparent keycap, electroplated bottom shell, transparent surface shell, and even the key shaft is a customized transparent jellyfish shaft. When I saw the online picture once, I felt a refreshing feeling, so I placed an order without hesitation, which led to this unboxing sharing.

First of all, one of the most important factors when buying this keyboard is its appearance. Putting the attribute of "transparency" on any digital product will become a design element that directly hits people's hearts, because transparent digital products are often The internal structure can be seen intuitively, and there is a sense of mechanics and technology, especially on the keyboard.

But problems also follow. Often transparent keyboards need to be more sophisticated in the material and materials of the keycaps and shells. Take ABS material keycaps as an example. There should be no air bubbles in the transparent keycaps. The existence of bubbles will make the image look and feel very good, so there are higher requirements for the process, and the light transmittance of the material must be guaranteed, otherwise when the backlight is turned on, the whole will not be "transparent", which will also affect the look and feel. No small impact.

So this 1% bluetooth mechanical keyboard uses a high-transparency PC cover. When I took out this keyboard from the box, I was afraid that its surface would be scratched. I thought that the base of the entire keyboard was purely electroplated. In fact, it is not, there is a layer of high-transparency PC shell outside the side plating layer as protection, so that the surrounding area is not so afraid of scratches in daily use.

But the bottom of this keyboard is the bare electroplating surface of ABS. The electroplating process is quite sophisticated. The overall surface looks smooth and well-proportioned, with obvious metal texture, and there is a metal nameplate in the middle, which improves the overall design of the keyboard. .

Talking about the metal texture, let’s also talk about the weight of this keyboard. It’s very heavy in the hand. It’s because the key shaft positioning plate uses a metal positioning plate, so that the key shaft can be fixed on the positioning plate more stably. , At the same time, when the key shaft touches the bottom, there will be a more stable rebound feel.

There is a metal nameplate inlaid in the middle of the front side of the keyboard, which improves the overall texture and appearance of the keyboard. In fact, the appearance design of this keyboard is more like a collectible on the whole. After opening the box, I really don’t want to use it. , for fear of destroying this crystal clear feeling.

The keycap uses a self-developed transparent ball cap, but the keycap is turned outward at the bottom position. The purpose of this is to make the gap between the keycap and the keycap when looking down on the entire keyboard. The feel will be smaller, and at the same time, it can meet the user's requirements for the feel of the ball cap, and because of the transparency, the divergence of the light can be better optimized.

The tops of the keycaps are made with ergonomic depressions, and the fingertips feel good when you touch them. At the same time, I also like the feel of this ball cap. For me, who has no fingers, the ball cap can Effectively reduce false touches.

The characters on the keycap adopt pad printing + UV process. Although the font is printed on the surface of the keycap, this process can prolong the retention time of the handwriting, and the wear resistance is still guaranteed, and because the keycap is transparent Material, now there is no need to worry about the oil on the surface of the keycap.

The switch body used in this keyboard is the jellyfish switch of Kaihua MX structure. The linear switch has no sense of paragraph and no clicking sound. When the key switch touches the bottom, there is a certain metallic sound. This feels relatively fresh, and there is no click for those who like linear switches For sound users, the feel of this shaft is just right.

At the same time, the pressure in grams of the shaft body is heavy, so that with the slightly higher keycap height of the original factory, the sound when the shaft body is pressed down and collides with the positioning plate is more obvious. The "mahjong sound" that comes with the original factory, this sound The online experience is also good. At the same time, with the design of full-key and no punch, the keyboard can handle freely whether it is Bluetooth typing for office or wired connection for games.

For a more detailed experience in the feel, first of all, this customized jellyfish switch that is close to the feel of the red switch. Although it is close to the red switch, it is slightly different from the traditional red switch. It feels much better than the support of the red switch. When the shaft touches the bottom, there is a crisp feel of the positioning plate rebounding.

I used the gold powder switch and the blue dragon switch before, so this jellyfish switch has a feeling between the two kinds of switches. This kind of feel is more versatile. Sexy and too strong, the pressure of this jellyfish shaft is not heavy, and the feel is relatively moderate.

In addition, due to the relationship between the metal positioning plate used, the deformation of the positioning plate is almost good when the key shaft touches the bottom of this keyboard. You can clearly feel the strong support given by the metal positioning plate. At the same time, the rebound of the metal provides Better audio feedback.

There are two switches at the bottom of the keyboard, because this keyboard is a dual-mode keyboard that supports wired mode and Bluetooth mode, so there is no separate receiver, which saves the trouble of the storage device. Bluetooth uses the Bluetooth 5.1 transmission protocol , There is no sense of delay in the scene of office typing, which can meet the needs of daily use.

In wired mode, you can use it while charging. The keyboard has a built-in 2000mAh battery. It takes about 3 hours to charge. If you use it for about 8 hours a day, the battery life can last up to 60 days, that is, two months. The experience of using 1 charge, the customized Bluetooth keyboard assembled by myself before, thank God that the battery life can last up to a week, and this 1% battery life is really amazing.

The keyboard supports dual systems of Win system and Mac system, and can be quickly switched through the switch at the bottom, which is simple and convenient to use.

I take it out every day and use it as a 2-in-1 tablet with a Win system. In the office, colleagues who pass by are curious to see this keyboard, because it is really too conspicuous, and I want to keep a low profile Not at all.

After a few days of getting started with the Lofree 1% dual-mode Bluetooth mechanical keyboard, my previous customized mechanical keyboards were all dusted on the wall. Whether it is from the appearance or the feel of use, this keyboard I can't find any faults. If I really want to pick out the shortcomings, this keyboard does not support the hot-swapping of the key shaft, and the shaft cannot be replaced. Because of the transparent keycap, if the shaft can be replaced later , the color of the shaft body inside is clear at a glance, so that the playability of this keyboard will be better, but having said that, if the shaft is changed, it will also destroy the crystal clear texture of the jellyfish shaft body of this keyboard. In summary, this keyboard Gathering the three major elements of appearance, feel and battery life of the Bluetooth mechanical keyboard, it is the one with the best appearance and the best comprehensive user experience among the mechanical keyboards that have been used recently. It is worth recommending!

Nowadays, many people should like to play games at home to kill time. And it can also promote feelings with good friends. Games are no strangers to our generation. I dare say that everyone knows it and everyone loves it! I saw the side-cut mechanical keyboard used by others on a certain platform before and thought it looked good. Since then, I have learned about mechanical keyboards and the famous cherry switches. There are brown switches, red switches, and green switches are different, and friends who have finished these mechanical keyboards should understand. I'm still a novice...but I really like the cherry keyboard. When playing games, pressing the keyboard makes a rattling sound, as well as the sense of satisfaction every time you press it, I enjoy it very much... very decompressed...

The first time I touched such a high-quality keyboard was at a friend's house, and she bought it for her boyfriend. I can't remember the exact model of the CHERRY mechanical keyboard. But looking at the appearance of this ammunition box, it is too beautiful to hold. The aluminum keyboard base and the damped swivel support make it feel like a two-character texture! But when I saw it, wow~ I was stunned! It's so beautiful! I really want to have it...

After hesitating for a long time and choosing for a long time, I finally decided to buy a tea shaft with cherries, and chose white among black and white. It's a bit darker like lime white when you get it, it's a more retro tone! I like retro things haha.... A key puller is provided as a gift, and there is also an adapter that can be used directly by plugging it in. The tea shaft is really more comfortable for coding, and the overall is good! It feels like opening the door to a new world and entering a new pit hahahahahahaha

Hello everyone, I am Taotie

Transparency has always been a hot topic in key circles. Many peripheral brands have tried this style before. For example, transparent keycaps, transparent shells and even transparent shafts have been distributed to mass-produced keyboards. It can be said that apart from PCB Transparency has not yet been achieved, and other accessories have been played out.

However, for me, proper transparency is actually enough to meet my needs. First, it can enrich the visual effects; Needs, but not too exaggerated, kill two birds with one stone. (The picture above is from the Internet)

For example, the Miwu Z980 experienced this time is such a three-mode mechanical keyboard with a transparent shell. In addition to having a transparent shell, it also uses 98% configuration, three-mode connection, MAC adaptation, and Jiadalong G yellow Pro switch. Body, Gasket structure and other functions and configurations.

Well, without further ado, let’s take a look at the specific performance of this Miwu Z980.

The product packaging uses a colorful multi-element sketch and an outline of the keyboard body, which is still in the same rice-like style as before.

After opening the package, you can see the accessories inside, including supplementary keycaps, two-in-one key and shaft pull, power cord, and manual.

When I saw the Miwu Z980 body, I was attracted by its appearance at the first sight. The pink transparent shell with beige keycaps is eye-catching. Compared with the traditional plastic shell, the transparent material can make the keyboard The internal structure of the car can be seen at a glance, and the visual impact will be more intense.

Perhaps it is to increase the area for placing Gasket strips, the keyboard frame is relatively thick, but in terms of the overall sense, the size is more appropriate, and there is no incongruity.

As the name suggests, this Miwu Z980 key adopts the classic 98% arrangement in its layout, that is, part of the functional area is cut off, and the arrow keys and number area are retained.

The biggest advantage of the 98% configuration is that it retains the functions of the 104-key full-size while reducing the length and size, and truly achieves both gaming and office work. At the same time, the sunken arrow keys with independent areas also reduce the risk of errors and ensure the accuracy of input.

In order to keep the light position, a row of display areas are added to the upper left corner of the keyboard, including upper and lower case, battery level, wireless connection, etc.

In addition, the slogan on the keycap of Miwu Z980 is also very interesting. The "I AM A BUSY BEE" on the space bar is not a true portrayal of the heart of the beating worker.

When you come to the side of the keyboard, you can better see the effect of the transparent shell, and the structure of the bottom shell and the inner tank are clear.

The logo of Miwu is printed on the lower right corner of the keyboard.

The position at the end integrates all the on/off keys, including the power switch, 2.4G/Bluetooth switch, WIN/MAC switch, Type-C interface and wireless receiver.

Turn it over, the bottom of this Miwu Z980 uses a non-transparent white plastic shell, although the visual impact is slightly inferior, but in terms of actual use, there is not much difference, after all, it is at the bottom of the keyboard, no one It'll be fine, turn it over and have a look.

However, in order not to appear too monotonous, the bottom is decorated with stripes and adds some design elements.

The foot path is a two-stage structure, which can meet the needs of different angles.

In terms of the shaft body, the Miwu Z980 in my hand uses Jiadalong G yellow pro. This shaft body is also a very classic linear shaft. Although it is a bit outdated, it has no stability or smoothness. Nothing to pick on.

Due to the factory run, Jiadalong G yellow pro50g trigger force and proper rebound make the percussion feel solid and stable, very comfortable.

The large key position is still the classic steel plate satellite shaft, and the interior is filled with grease, which can effectively avoid noise and improve fluency. In addition, it can be seen that in order to match the soft elastic properties of the Gasket structure, the positioning plate is not made of aluminum alloy, but a softer PC material. From this, it can also be seen that Miwu has also made some efforts in the selection of structural materials.

When it comes to the Gasket structure, friends who have played customization know that the leaf spring structure and cushioning material are more important for the soft elastic effect. Then this Miwu Z980 can be seen from the side with multi-leaf spring support and high Combination of elastic white rubber.

After all, for a large size like 98%, it is reasonable to have more support points for the liner. The white rubber is more willful and feels more even.

Having said so much, let's actually experience how the percussion sounds perform.

As the current mechanical keyboard, hot swapping has become a standard option. The Miwu Z980 is no exception. The shaft body can be easily pulled out through the presented shaft puller, which is convenient for replacement and maintenance of the shaft body at any time.

In terms of keycaps, this keyboard provides more durable PBT sublimation keycaps. There is no problem with this set of keycaps in terms of texture or workmanship. Although the color is not as gorgeous as the second color, the overall performance is still unified, and there is no retouching and fading.

After looking at it, the wall thickness of the keycap is quite strong and will not be penetrated by light.

In terms of height, this keycap adopts the original height, which is slightly lower than that of the OEM, but the tapping angle will be more comfortable and the ergonomic arc can also be guaranteed.

Another interesting thing is that there are small characters about related functions printed on the individual keys of the keycaps. Although the characters are very small in English, it feels quite artistic when viewed from a distance.

In terms of wireless connection, this Miwu Z980 adopts wired/Bluetooth/2.4G three-mode connection, which can be selected according to different usage scenarios.

In Bluetooth mode, the keyboard can quickly switch between three devices. The 2.4G wireless connection only needs to be plugged into the PC to use the receiver. After trying it, the delay performance in these two modes is quite good, and there will be no obvious lag.

In terms of lighting effects, this Miwu Z980 has colorful RGB lighting effects and a variety of combination modes, but because the keycaps are not transparent, it is more suitable as a background light.

Through this period of use, I can make a small summary, that is, this Miwu Z980 is definitely an excellent mechanical keyboard.

First of all, in terms of appearance, the transparent pink shell can immediately attract the attention of consumers, especially for girls who are obsessed with pink, when you get the real thing, you will definitely shout "this is my dish". Of course, in addition to the appearance, the excellent tapping feel, stable shaft performance, large key position adjustment and the addition of Gasket structure also make it have good tapping properties, plus three-mode connection, hot-swappable technology, PBT The blessing of keycaps and 98% configuration makes this Miwu Z980 almost impossible to find any shortcomings.

So if you want to have a mechanical keyboard with a pink casing at a price of around 400 yuan, believe me, this Miwu Z980 must be your best choice.

Well, the above is the whole content of this article, thank you for reading!

The usual work machine is the Huawei Mate series, basically one generation is bought.

There is also a Huawei tablet product in hand - MatePadPro 11.

With the development of HarmonyOS, multi-device collaboration has become more and more mature, and mobile phones and tablets can also form a super terminal. I just want to equip the tablet with a keyboard case, which can not only be used as a protective case, but also can simply handle document work when necessary.

Officially fitted keyboard cases are the best, but they are too expensive.
Forgive me for being poor.

Finally, among many third-party protective cases, this one was selected.

Shipped by SF Express, the speed is very fast, and it was delivered the next day. Let’s take a look at the appearance of the product first.

The outer packaging is simple and generous, with no redundant design on the front, only pictures of products, brand logos and product names.

There are some product information introductions and brand information on the back.

out of the box. This bluetooth keyboard cover is black, which belongs to the color between gray and black. The lower left corner of the back is the brand Logo.

We can see that the surface has a certain texture treatment and has a certain anti-skid performance.

The magnetic back cover and the Bluetooth keyboard are an integrated design, which can be used not only as a Bluetooth keyboard to make your tablet productive, but also as a protective case.

On the keyboard surface, there is a slot where the tablet can be placed while typing.

The surface of the keyboard is frosted. The workmanship is very meticulous.

On the side is a Bluetooth switch and a rechargeable TypeC interface.

Because it is a magnetic protection case, it is very convenient to install. After aligning the rear lens, just put it on, and the hole is more accurate. The overall shape is very light and thin, which can be used as a protective cover.

Turn on the switch of the Bluetooth keyboard protective case, and you can search for this protective case on the Bluetooth interface of the tablet. There is a blue indicator light above the keyboard of the protective case, which will keep flashing until the connection is successful.

Click on the keyboard case to pair.

The support angle is about 70 degrees, and the support is very firm. This is because there is a built-in magnetic attraction in the support groove. After the support is done, the tablet will not slip off easily.

The height of the keyboard keys is moderate, the feedback is very good, the distance between the keys is moderate, and it is very easy to control.

Open the note app, in addition to using the stylus, it also supports Bluetooth keyboard input. I personally think it is more convenient than the stylus. The stylus draws for marking, and the keyboard for text input complements each other.

This long article of mine was coded with this Bluetooth keyboard case. The content of nearly 1,000 words was completed in less than 20 minutes. In the process of coding, I didn't feel any delay, basically it was knocked out.

Finally, when it comes to the battery life of the Bluetooth keyboard case, the official introduction is about 80 hours.

The keyboard itself has a switch, which can be turned off when not in use. Normal intermittent use should not be a problem for a week.

This bluetooth keyboard case is affordable, simple and light in design, magnetic design, easy to install, good keyboard feedback, no delay in typing, and long battery life, which makes matepad pro 11 have light productivity. Personally, I think it is still very good of!

The keyboard is the main input tool of the computer, and the purpose of ergonomics is nothing more than to make the user more comfortable. Some keyboards adopt a design with a raised center and low sides, allowing the wrist to maintain a relatively natural posture; some keyboards divide the input area into two large areas on the left and right, allowing the arms to maintain a relatively comfortable natural angle; as for the keyboard itself The basic elements such as the inclination angle and the height of the keycap include many ergonomic designs that we have become accustomed to. Today, I would like to share with you a MD770 split mechanical keyboard from MISTEL, and see how some of its ergonomic designs can bring a more comfortable experience.

There are some irregular coil patterns on the front of the keyboard package, perhaps to express the meaning of irregular but ergonomic? Anyway, the overall design is relatively simple, and the brand name, model and Cherry shaft are all the information that can be seen.

Happy to hear and see a family portrait: MD770 RGB keyboard body, a small bag of supplementary keycaps, a USB to Type-C data cable, a C to C spring data cable, a wire key puller, four rubber feet, and an instruction manual.

At first glance, the keyboard looks like a common 84 arrangement. Except for the gaps on both sides that are a bit eye-catching, there is nothing unique about it.

There are two indicator lights and the "MiSTEL" Logo on the frame in the upper right corner.

The keyboard itself has a small tilt angle, and with the OEM height keycaps, it looks mediocre by any means.

Before the keyboard is separated from the left and right, the four Type-C sockets on the rear side are the most distinctive.

In fact, the separation of the keyboard is very simple, and one can be divided into two with a little force. To be precise, the keyboard is folded together only because it is manually assembled and placed on the desktop, and there is no design to make it tightly integrated between the left and right parts.

From this point of view, it is even clearer, which is equivalent to adding side walls at the separation, so that it can become an independent entity alone.

If you need to use the left and right keyboards at the same time, you first need to use the C to C data cable in the accessory to connect the left and right keyboards.

Then use the USB to Type-C data cable to connect the Type-C jack on the upper right corner of the right keyboard with the host computer, so as to provide power supply and data transmission capability for the entire keyboard.

Connecting the right keyboard to the host computer alone can also be used independently, but it seems unlikely that the right half can be used independently.

Many brands have produced one-handed keyboards in the left area. The left part of MD770 is such a one-handed small keyboard when used alone. The current popular CS:GO, LOL and other games use this half side. It can give The mouse leaves enough room for movement, the only regret is that the backlight cannot be turned on when the left keyboard is used alone.

If the backlight is necessary, it can only be fully connected, and the right keyboard is placed in a far area to achieve it. Personally, I think this design idea is not very reasonable, either the position of the main connecting jack is shifted to the left; or the two jacks can independently take on the same function. In the final analysis, it is nothing more than the position of the control chip. The current practice is likely to be a compromise due to the relatively small area of ​​the left part of the PCB.

There are still some gaps in the popular elements of keyboards between Bay Bay and the mainland. This keyboard switch body uses cherry silent red switches, and it uses a welded structure. Everyone should be familiar with the feel of the Cherry switch. The silent switch will be a little dull when it hits the bottom, and the ancestral spring sound is also a little bit. On the contrary, the consistency of the large keys of the satellite axis is quite good, and it has been lubricated and adjusted before leaving the factory, which is worthy of praise.

The standard keycaps are OEM-height PBT two-color keycaps, and the craftsmanship and details are still acceptable.

The anti-slip effect of the four small round anti-slip stickers on the bottom of the keyboard is average. There is a DIP configuration switch group on the lower side, which can be used to switch between MAC and Win systems, as well as the position switching function of different keys. can see this setting.

In addition, you can use the feet in the accessories to achieve two different keyboard inclinations. One is to install the feet near the back to increase the overall inclination of the keyboard.

In addition, the four foot supports are installed on both sides of the split position to form an inclined posture with a high middle and low sides. This posture is actually more in line with the normal placement of the arms and wrists. In addition, the split left and right keyboards can be placed in any position, making it more comfortable and smooth to use. Of course, using a split keyboard has higher requirements for fingering standards, otherwise it will affect the input efficiency.

The lighting mode adjustment of the keyboard is all driver-free operation, and you can also use the key combination to customize the color and set the personalized light color. At the same time, the keyboard can also set three layers of custom layers, except that it is a little cumbersome to set up, but the playability is still relatively high.

The MISTEL MD770 RGB split mechanical keyboard has better adaptability than the keyboards we often see, and any part can be used independently according to different actual needs. RGB lighting and three-layer macro definition make the keyboard more playable. Of course, there are also shortcomings, such as the backlight cannot be turned on when the left side is used alone. Overall, the advantages of this keyboard are very obvious, especially suitable for users who have correct fingering and can use the keyboard proficiently. It is also a good choice if you are a novelty hunter, or want to relieve wrist strain caused by long-term use of the keyboard. Of course, if you feel that too many cables in the wired version are in the way, you can also choose the Bluetooth version in one step to keep the desktop clean and simple.