Many netizens buy keyboards and put them on the table. As a result, their elbows are not level with the keyboard. When typing, they either have to struggle to reach the keyboard, typing like holding a bowl; Even if some desks have a keyboard tray, because the height of the tray is not suitable, you can only raise the seat when typing; but if the desk and chair are too high, your feet will not touch the ground, and you will get tired after a long time.

Just find a picture on the Internet to explain: Obviously, this old man’s chair cannot be raised and lowered, and the height of the keyboard tray on the table is not suitable. It puts the keyboard on the table. It looks good, but you can tell it at a glance Usually not comfortable.

How did I find this picture? Netizens asked for help. Don't say he feels uncomfortable, I can tell he's uncomfortable just by looking at him. Because when I was renting a house when I was in school, the tables, chairs and tabletops were like this.

Do you see the point? The key is how to place the keyboard in a position that is most suitable for your hands to type on the keyboard.

1. Buy an adjustable desk. Once and for all, it can also be used to stand or sit, which is very practical, but it is expensive, and a good-quality electric adjustable table will cost more than a thousand yuan.

2. DIY homemade keyboard tray, or buy ready-made ones. But with all due respect, those ready-made keyboard trays on the Internet are either too old-fashioned, dangling and not strong; or they are brands that charge IQ tax. JD has a self-proclaimed Japanese brand. I see that there are still worth buying Chief Life They advertised for it. They have a keyboard tray that can be made without punching holes. It sells for six to seven hundred, and the slide rails are not high-end. This IQ tax is properly fooling consumers who don’t understand. Woolen cloth.

The most important thing is that many ready-made keyboard trays are not as big as you want. It is obviously a problem that can be solved by a custom-made shelf. The merchants come up with several price levels so that you can sell them at a higher price. The smallest size keyboard tray , you put a keyboard enough to put the mouse. And if the mouse is not released, this bracket is equivalent to taking off your pants and farting...

After looking around, I finally adopted a homemade solution. First of all, there are 2 slide rails, the ordinary ones for cabinet drawers, solid balls, three-section drawers, and a pair of good quality is only a few dozen dollars. I won more than 20 of this pair.

Buy a few bracket parts that are punched and fixed under the table, some screws and nuts, and then find a manufacturer to customize a board, whether it is solid wood or melamine board, the brackets like IKEA are fine, and the most expensive is only thirty to fifty. The next step is to rely on tools and your own DIY practical ability.

In short, after a set, let’s say 100 yuan, I can get it for 60 yuan. The production process is as follows:

Since you don’t want to dismantle the tabletop during installation (in fact, it’s easier to install it accurately this way), you “construct” directly under the table, which saves you the trouble of dismantling and moving around, but also increases the difficulty for yourself to a certain extent.

But it was successfully completed. As shown below, after finishing, the drawer can accommodate keyboard and mobile phone, and there is enough room for mouse operation. The drawer is pulled and pushed back smoothly, and there are two spaces on the desktop and the drawer, which can be used at will.

Regardless of the size of the desktop, as long as there is enough space under the table board, then you can have a good enough keyboard tray through DIY, and you don’t have to stick to the size of the ready-made drawer boards on the market. My size is 80x25cm. Put 108 keyboard + mouse is enough, you can refer to it.

By the way, my desk itself is also an electric adjustable desk, so after making this bracket, it means that I have added two buffs to myself. If I want to type comfortably, the desk can be lifted and lowered, and the keyboard can be placed on the desk or placed on the keyboard. On the bracket, it is also very free.

If you don’t have a cost to start a lift table, you can also try my method. The only thing you need to consider is the corner code under the table (determine how far the distance between your keyboard tray and the table board is, and when you type on the keyboard). whether the arms are parallel).

Next, let me talk about the 108-key wireless keyboard that I tucked into the keyboard tray and intended to be the mainstay. By the way, I would like to share my version of the table.

A picture to understand, including tables and chairs, computers, monitors, smart screens, peripherals, storage devices, lighting and lighting, etc., are all purchased and used by ourselves.

See Section Three for a brief introduction and description of each piece of equipment.

Everyone has their own preferences when it comes to keyboard arrangements. For example, code farmers prefer 75%, 82 and 84 keys are the best; the pursuit of compactness and portability, three-mode 68 keys are the first choice; daily coding like me must use independent function keys and numeric keypads, at first I thought 68 keys Very nice. After a long time, I found that the input efficiency is slightly low. When I get busy, I will talk about the 108 full configuration.

I often say: Don’t consume if you don’t have rigid needs. Now the demand is coming: wireless, 100% matching, mechanical key switch, specially for office codes, tea switch is the best choice, it doesn’t matter whether there is a backlight, the important thing is that the leather is easy to use, and the price can be more affordable. . Solution: What keyboard is suitable?

In April and May of this year, I turned around and chose this ikbc W210 in Dog East, which supports 2.4Ghz wireless connection, 108 keys, Cherry brown switch, no backlight, PBT keycap gray and white color matching, known as "time gray".

The kraft paper box is no longer displayed, the packaging is simple and environmentally friendly, and the keyboard and accessories are well protected. In addition to the instruction manual, it comes with 2 AA batteries, 3 replaceable keycaps in each of red and blue colors, and a key puller.

The white of the keyboard is warmer, and the gray keycaps are slightly darker. The mouse pad on my desk is gray. I thought it would be a bit of a color, but in fact it has separate layers, which is okay.

The 108 key generally has 4 more multimedia keys than the 104, just in the upper right corner, which is more suitable for office code words and quick control.

There is nothing fancy about the style of the whole keyboard, whether it is industrial style or retro temperament, the color matching is very versatile, and it is practical in the soul.

The key position of ikbc W210de conforms to the ergonomic design, the key position feels quite good, and there are two-stage feet on the back that can be adjusted. The battery compartment is also placed here, and there is a toggle switch on the compartment cover; put in the battery for the first use, and take out the signal receiver.

How to say 2.4G, I personally feel that it is more worry-free to use in a fixed place. With two AAA batteries, the official battery life is about five or six hours a day, which can last for more than half a year. After using it for several months, the delay is low, and it is quite anti-interference. It is very suitable for the workplace or home office.

According to my needs, tea shafts are rarer than green shafts. The 68-key wireless keyboard I used before on my desk is a green switch. The sense of rank is very direct, but it is also very noisy. From a practical point of view-it is more than enough for A, but not stable enough. Quiet beauty.

Compared with the ikbc W210 Time Gray, it is different. Although this product has no lights and is low-key, it has the original Cherry MX key switch, and 50 million taps are worry-free. The tea switch feels warm and not cramped. Very comfortable, playing "Yuan Shen" will not lose the chain.

The two-color PBT keycap is not easy to oil, and the brothers who are resistant to making it fight side by side without ambiguity.

There are only 3x2 sets of DIY keycaps, but 3 red and 3 blue are harmonious and unobtrusive with the overall retro style, which can be the finishing touch, and it also conforms to my simple table design concept.

It has been used for 2 months, and it can be summed up in 4 words: it is neither earthy nor demonic, and it is more suitable as a friend who fights side by side.

The only thing I need to remind everyone is that the W series (W210, W200) only supports six-key rollover, and the C series (C210, C200) supports all-key rollover. There is no rush for the buttons, six buttons are enough for office work.

Well, I will end my sharing here, hoping to give you some reference. After all, the table setting is also (yan) progressing (jiu) with (xi) time (xin). You can learn from one another through my evaluation experience and desktop layout scheme to create the most suitable work/entertainment desktop for you.

▶Computer desk: NetEase Yanxuan Electric Lifting Desk Dual motor drive 1400x700mm; the larger the table, the more recommended dual motors, stable, not shaking, and strong. But a single motor doesn't mean it can't be used. You get what you pay for, consider it comprehensively. Personally, I suggest not to choose glass noodles. If the transportation is not proper, the glass will explode. Search the case yourself and just buy wood grain noodles or melamine noodles.

▶Keyboard and mouse drawer: DIY homemade 800x250mm (cost 60, I can give you a detailed tutorial if you are interested).

Among them, the slide rails were purchased from jd during the 618 period. You don’t have to buy the same ones as me. There are some good quality ones at this price. The basic quality is quietness and smooth push and pull. The ones with balls must be double-row and solid balls. You can see the details for yourself. You can see the workmanship and so on by comparing them.

▶E-sports chair: Anderst Wars Throne, mine is the classic model, I have been sitting on it for a long time, the disadvantage is that it will be hot in summer, not as comfortable as the mesh office chair; however, the mesh office chair has been sitting for a long time, The support of the cloth will decrease, "sit collapsed", each has its own advantages and disadvantages.

▶PC host: Xingu Kaiyuan T1 high-tower chassis + ASUS X570E+5900x platform (see my installation evaluation for details, monthly updates)

▶Display: Titan Legion P2SA2V 27-inch 4K 144Hz monitor. This year I planned to use 30-series graphics cards. After the 3080 12GB came out, I was very disappointed. Now that there are probability mines everywhere, I really don’t want to take this risk; Problem, I don't have to play games. 144Hz may not be used anymore, but the 4K picture is worth it, the graphics card is saved, and the display can still improve the visual experience, and it is real.

▶Keyboard 1: Durga K330w mint green, 68 keys, wireless three-mode, green switch. This is what I mean by looking comfortable, but if it is purely for office work and codewords, the overly condensed keys will reduce the efficiency, which is the main reason why I changed to 108 keys.

▶Keyboard 2: ikbc W210 time gray, 108 keys, 2.4G wireless, cherry brown switch. There have been detailed evaluations in the previous article, so I won’t say more here.

▶Mouse 1: Razer Purgatory V2 X Extreme Wireless Mouse. The wireless mouse I recently upgraded is better than the price/performance ratio, low latency, and feels good in the hand. But in terms of low latency, you still need a wired mouse.

▶Mouse 2: Razer Basilisk V3 Basilisk RGB wired mouse. Wired mice don’t buy cost-effective ones, they must be mid-range and high-end. I think this light from the lamp factory is okay, and the price is also moderate. The key is that the feel and quality of all aspects are well-balanced. Although there are also wireless models in the same series, I highly recommend the wired version!

▶Smart screen: Redmi Xiaoai touch screen speaker8

After the Xiaomi touch screen speaker made a Pro, Redmi followed up with the release of the cost-effective model. For me, it is a good foreign aid to use it as a large clock and watch Douyin anytime and anywhere. In addition, this appearance is very suitable. My minimalist desktop.

▶External mobile hard disk: Seagate Backup Plus HUB 4TB mobile hard disk

It has been used for five years, two words: strong! The 4TB version may have been discontinued now, and I won it at 1k Dayang back then. Now it is estimated that the same money can buy 12TB 16TB, right? I didn't do too much research, because 4TB external storage is enough for me for the time being, but if it's not possible, I can also plug mechanical hard drives in my PC and NAS, so the external 4TB doesn't cost much.

▶Wireless Earphones: HIFIMAN DEVA Headphones

You can see the uniqueness of HIFIMAN DEVA from the photos. It has become a habit to put it on the desktop, sometimes it is connected to a mobile phone, and sometimes it is connected to a computer. But it is still rare to use it for computers. To be honest, if you don’t plan to listen to music purely, you can still bring in-ear or external speakers with the monitor on in summer.

▶Wired headphones: Sennheiser IE 100 Pro in-ear. I use this 60% of the time when cutting videos or watching movies or listening to songs. I use both wired earphones and TWS earphones, but the Senhai model is always plugged into my computer. I don’t have any spare money to invest in other earphones. I think it will last for a few more years.

▶NAS: ORICO MetaBox Pro. Comrades, I am still evaluating this model, and I have changed it to a five-disk one. There are 2 network ports at the back. I plan to transform it into a soft router. I will tell you about other functions after tinkering with it.

▶Desktop lighting: Yeelight Smart Screen Hanging Light Pro (with RGB ambient backlight), the new equipment, meets the needs of desktop lighting and RGB lighting on the back wall of the display, which just complements the coverage area of ​​the RGB light strip on the edge of the table! Please see my previous review for details!

▶Atmospheric lighting: Yeelight smart lantern with 2M basic model + adapter (table side against the wall), same as above.

Finally, let's summarize it for your convenience. Thank you for your support.

P.S: Except for the NAS, I have posted reviews or comments on the above list items on Aunt Zhang. Interested friends can review them by themselves.

Still the same sentence, during the economic downturn, you can't spend blindly. All Mani is used wisely, I use whatever is easy to use, and it is enough to take into account the aesthetics.

I am Bidian Coolplay, if you like the photos I took and the text I wrote, you might as well pay attention, and I will tell you something fun and useful every day.

Speaking of Heijue, I think of their Dartman keyboards. I have bought several keyboards of Heijue. I didn’t expect that its products began to gradually transform into customization last year, such as their AC081 series and AC067 series. , but because of the portability problem, I haven't started it yet, but the appearance after seeing other players getting started is really high!

The AK816 Pro keyboard that I bought this time is actually designed based on AC081. Compared with AC081, the appearance of AK816 Pro has not changed much, but the shell adopts ABS injection molding process with lower cost and better portability. The overall configuration has also been upgraded. First of all, the Gasket gasket structure and RGB music rhythm are retained, and it also supports Bluetooth, wireless 2.4G, and wired three-mode connections, which made me quite expect and surprise.

Exterior

Heijue AK816 Pro keyboard has 2 colors, one is white cosmic adventure, and the other is black rock fantasy, the appearance value is quite high at first glance.

Heijue now has higher and higher requirements for the craftsmanship of the keyboard. The outer packaging design is very simple, which not only retains enough mystery, but also has a simple atmosphere. It is still very heavy to hold with one hand.

When I opened the package, I saw the real appearance of the keyboard. I got the black rock fantasy, which looks very fashionable and full of texture.

The AK816 pro adopts a compact layout of 81 keys, 75% of which are arranged in a row, and has a page-turning key and an F-key area, which is really friendly to a text worker like me. Of course, you can also perform macro editing settings for each key through the driver of this keyboard, and changing the key function will be more suitable for you.

The back of the Heijue AK816 Pro keyboard is equipped with a two-stage foot support. Personally, I generally like to use the keyboard with it propped up.

There are three-mode switching keys and Mac and Windows switching keys at the bottom of the back, which can be seen at a glance.

In addition, Heijue also hides the 2.4G wireless receiver near the wired interface of the keyboard, which is magnetically absorbed, easy to take and store, does not take up space, and can prevent loss.

Heijue AK816 Pro adopts the Gasket structure that has been popular in the past two years for customized key rings. Silicone gaskets are set on the upper and lower covers to support the positioning plate to avoid the hard impact of the internal components of the keyboard on the shell when knocking. PORON is also added inside. Bottom cotton, PORON shaft underpad, and PORON sandwich cotton can eliminate a lot of button noise, and when used with a softer and more flexible PC positioning board, it achieves both excellent feel and hearing.

With the sublimation PBT keycap of MDA height, the contact area with the finger is increased, which greatly improves the comfort of typing.

In terms of accessories, Heijue AK816 pro also considerately comes with a themed mouse pad, a dust cover, and of course indispensable data cables, 2-in-1 key puller, supplementary mac keycaps, etc.

Experience

As far as the connection stability is concerned, I very much approve of the performance of the AK816 Pro. I can easily switch between any devices, and there is basically no delay during use.

If I use the host at home, I usually connect via a wired connection or a 2.4G receiver. If I use Surface or iPad daily, I use Bluetooth connection. The switching experience is very good.

The next thing I want to talk about is the portability and battery life of the Heijue AK816 Pro. The Heijue AK816 Pro has a built-in 3000mAh large battery. When the backlight is turned off, it can be used for up to 50 days. After turning on the backlight, At most, it can persist for at least a week. I personally think that this battery life is quite satisfactory.

I switched to a large white desktop, so I personally prefer to turn off the backlight mode and use it longer.

The weight of AK816 Pro is 990g, which is almost the weight of two bottles of mineral water. It is not very light, but it can be put into a backpack and carried out.

Next, let’s talk about its typing feel. The AK816 pro is equipped with Jiadalong G Silver 2.0 axis body, with only 43g of trigger key travel, the feel is relatively light, and the knocking sound is not too loud.

After using it for a week, I feel that its feel is much better than that of ordinary mechanical keyboards. It is the kind of light and refreshing typing, and there is obvious elastic feedback at the bottom. No matter how hard I press, it will give back feedback, making it easier to use.

The coding experience is much better than my original mechanical keyboard, and the sound is more crisp, because the keycap is made of PBT material, and it will not fade or become oily after long-term use.

In addition, the key to customization is to be able to freely replace keycaps and shafts. The Heijue AK816 Pro keyboard is equipped with a Kaihua hot-swappable base. All keys support hot-swappable, and support 3-pin and 5-pin shafts. , can be compatible with most of the mainstream shafts on the market, and you can replace any other shafts for user experience later.

Heijue AK816 Pro also supports 18 kinds of RGB backlight effects that can be switched. Its music rhythm mode is very interesting. You can download the corresponding driver on the official website to adjust it, so that the lights can change with the rhythm of the music we play.

What I didn't expect was that Heijue AK816 Pro actually added a volume knob. I think this function is intuitive and convenient. When playing games, you can use this knob to quickly adjust the volume.

Summarize

The early keyboards were just productivity tools for me, and the most important thing was the cost performance, but now I not only care about the cost performance of the keyboard, but also the comfort and appearance of keyboard typing, and Heijue AK816 Pro not only has these, but even does it well. Even better, full sincerity is in the details.

With the development of the domestic game industry, game-related products have sprung up like mushrooms after rain, and the previous mechanical keyboards with high-end names have also fallen from the altar, down to the price level of 100 yuan!

Domestic manufacturers of mechanical keyboards are also flourishing, and traditional computer brands have also come to an end to carve up the low-end peripheral market

The keyboard design of KB3222D is very novel, one is a traditional silly black mechanical keyboard, and the other is a "suspension" keyboard

There is a shell, which is detachable, and there are two experiences between disassembly and assembly!

The suspended hood, abs two-color injection plastic, looks like future technology!

There are six strong magnets on the case, which is very convenient to take and install!

There are also rgb lighting effects, 100% lighting layout, and colorful combinations!

Mechanical blue switch, the sound is crisp, and the feel is excellent!

There are also fn multimedia keys that other keyboards also have, and there are many combinations!

This keyboard is less than 200 yuan, which is extremely cost-effective, and it is more comfortable to touch than my Knopp mechanical keyboard!

Who doesn't want a mechanical keyboard that feels great, sounds great, and looks great these days?

As the saying goes: If you plant flowers deliberately, they will not bloom, but if you plant willows unintentionally, they will make shade. Usually when I have nothing to do, I still go outside more often, and it’s the end of the year again. Some stores have started clearance sales again.

But it happened during the epidemic this year. Some shop owners probably gave up their good dreams long ago. The good shop can't continue, so I go back home for the time being. So the streets are full of big stickers of clearance sales.

Web image

Although some things are not useful, even if you pass by, you can go in and have a look. I missed it last month, and I got a set of Apple's second-hand original wired three-button mouse A1152 and wired keyboard A1243. Although this set has been around for a long time.

Let's talk about the price first! For the first time, I got the wired keyboard first, and got it with a counter-offer of 10 yuan for 20 yuan. The second time I saw the mouse, I told the boss to sell it to me at the same price. That is, a set of keyboard and mouse costs only 20 yuan. It's fine to brush clean. After all, these things have been released for more than ten years.

wash suit

The system used on the desktop is Windows 11. Prepare to adapt and play. See if it works normally?

Look at mighty mouse first, a mouse with a trackball. There are no left and right physical keys. It can only be determined by touching the left and right buttons.

not too dirty

Apple's cables generally break from where the USB cable connects. I have several Apple charging cables that have broken directly from that location. It looked good this time.

bottom

I thought about taking it apart. But there is no place to start, because there are no screws on the body.

The touch feeling is different when the middle trackball is electrified and not electrified. There is a sense of scale when the power is turned on.

after cleaning

Just wipe it clean. Check for rust issues.

bit by bit rusty

good interface

The keyboard, at first, was dirty. But the picture below is after cleaning. No dirty pictures were taken.

under

The four sides are simple and there is no screw. That's four pads.

back

I thought there were screws on the back, so I could take it apart and have a look. Also did not find a place to start. A rubber pad was damaged. I disassembled a small part and gave up after checking that there were no screw holes. It can only be said that if it is bad, it can only be demolished violently. It's a bit of a gamble.

With USB ports on both sides

good interface

no rust

But Apple does a good job of switching between upper and lower case on the keyboard. Tips are displayed directly on the keys.

At-a-glance case switching

try it

Summary: The basic use is no different from that of a normal keyboard and mouse. I just don't see the screenshot button. Estimated to have to look up the data to see.

The advantages of this set of keyboard and mouse: 1. The keyboard is relatively thin, and the body is made of metal aluminum. Symmetrical design, simple.

2. The trackball in the middle of the mouse is still good. Comfortable grip.

Disadvantages: 1. The USB cable is relatively short. It is suitable for small hosts to be used on the desktop.

2. The entire keyboard and mouse can only be cleaned on the surface, because there are no screws. It's almost a waste to take it apart.

3. Some shortcut keys on the keyboard are not available. It should be a system mismatch problem.

4. The mouse drag response is not very sensitive. Playing games can be ignored, and it is enough for office use.

I bought this second-hand thing because it looks cheap and it's worth it. can be used normally. The most important thing is that the mechanical keyboard currently used is too loud when typing at night. Although it is very comfortable to listen to, it still affects others' rest in the middle of the night. So this is the keyboard for the night shift. I saw that many of them are still family heirlooms in the seafood market. Personally, I think it is better to buy a brand new keyboard with dozens of dollars, which is better than this set, of course, if your computer system is an Apple system. Then I take that back. Because there is nothing to say about the Apple ecological chain. I wish you all a happy life!

Hello everyone, I am your old friend sevokk, very happy to meet you again. As the saying goes, "If you want to do a good job, you must first sharpen your tools." As a daily gaming and typing tool, the keyboard is used for a long time, and it is very important to have a good-looking design and reliable workmanship. In addition, the appropriate key position is also very helpful for us to get started quickly and use it efficiently. After I used the mechanical keyboard, the smooth hitting feeling made me never go back.

What I bring to you today is that Keychron has brought its brand new product—Keychron V3 mechanical keyboard. As a well-known mechanical keyboard brand overseas, Keychron has gradually become known to everyone in China. The product focuses on good looks, sufficient materials and perfect compatibility with Mac. Let's experience the actual performance of this keyboard.

The packaging of the Keychron V3 mechanical keyboard adopts a cool black and silver color scheme, which is very geeky. The front of the packaging is printed to depict the outline of the product. The printing can reflect different colors at different light angles, which is very delicate.

The family portrait bar in the package includes the common keyboard body, instructions, key puller, shaft puller, power cord, etc.

What's more special is that Keychron V3 also comes with 4 replacement keycaps for Windows system, replacement screw parts and screwdriver tools, making the customized DIY to the fullest.

The shell of the Keychron V3 mechanical keyboard is made of high-quality PC material, and the surface has a matte touch. Compared with 104 keys, 87 keys mainly save 17 keys in the number area. Compared with 61 keys, the keyboard layout of 87 keys is relatively complete, so the adaptation time will be much shorter. This is also my favorite key layout, which ensures functionality and saves desk space.

In terms of color matching, the Keychron V3 mechanical keyboard is very retro. The esc and enter keys are in eye-catching red, and other function keys are in low-saturated gray-blue. The overall color scheme reminds me of the keyboard color of my ThinkPad, which is very kind. The simple and simple design style is also the consistent feature and highlight of Keychron.

It is worth mentioning that the Keychron V3 mechanical keyboard adds a programmable metal knob on the side of the F12. We can use it to adjust the volume, and press the knob switch to mute; at the same time, with the Fn key, you can control the brightness of the light, and press it to turn off the light effect, which is very convenient.

The Keychron V3 mechanical keyboard is equipped with MacOS function keys when leaving the factory. If you are a Windows user, there is also a set of Windows keys in the package for replacement. After all, there are more Windows system users in China.

The F1-F12 function keys are basically the same as the MacOS keys, which may be one of the reasons why it has a good reputation among Apple computer users.

Looking at the back, it can be judged by the exposed 8 gold screws that the Keychron V3 adopts a classic sky and earth cover structure design. It is quite simple and easy to operate when disassembling the upper and lower covers. Certain playability.

There are two large and small foot supports, plus the way of laying flat, there are three keyboard tilt angles for adjustment, which fully meet the needs of different usage habits. The small details are in place, and the two sections of the feet are equipped with non-slip foot pads, which ensure the stability of the keyboard while adjusting the angle.

When the small feet are erected, the inclination angle is about 8 degrees. When the big feet are erected, it is about 12 degrees from the horizontal. The width of the feet is wide, the support is very stable, and the strength of opening and closing is moderate. The most suitable slope angle on weekdays makes it easier to code and write.

At the top of the upper left corner of the keyboard is the Type-C interface of the keyboard and the Windows/MacOS switch.

Keychron V3 adopts wired connection, the key and wire are separated, the wire length is about 2m, and the dual Type-C interface is convenient for connecting to Mac devices.

In order to meet the needs of more desktop users, a USB-A adapter is also included.

In terms of keycaps, Keychron V3 uses OSA-height keycaps and PBT two-color injection keycaps. The matte grain on the surface is very fine and relatively dry to the touch. Compared with ordinary ABS keycaps, the material of PBT has the advantage of being wear-resistant, not prone to oily shine, and has very good durability.

The satellite shaft design adopted by the space key and other large keys can not only ensure that the keycap is fixed and stable, but also ensure that it does not shake when pressed. The entire large key can maintain a balance and fall, and there is almost no spring sound when pressed. In addition, if you are careful, you will find that there is a reset button and LOGO under the space bar of Keychron V3, and the brand atmosphere is deeply rooted in the bone marrow.

In terms of switches, the self-developed K-Pro switches used by Keychron V3 have three options: green switches, brown switches, and red switches. The keys are light and quick to touch. This time I chose the green switch.

Although it is a self-developed axis, the consistency of all the keys on the entire keyboard is very good. The subjective feeling is that the key travel is appropriate, the keystrokes are crisp and neat, the sense of paragraph is strong, the rebound is strong, and the sound of each keystroke is very crisp. Generally speaking, the experience of using this green switch is quite good.

The Keychron V3 mechanical keyboard has also joined the very popular shaft hot-swapping solution. Use a shaft puller to press the buckles on the upper and lower sides of the shaft, and pull out the shaft with light force. When installing, align the two pins of the shaft body with the holes of the shaft seat, and press down vertically.

Compatible with mainstream switches such as tripod switches and pentapod switches, players can even use different switches together to experience the feel performance brought by different switches on the same keyboard, which meets our subdivision needs for switches and feel , to create your own perfect personalized keyboard.

Customized keyboards do their best to meet users' pursuit of appearance and playability, and RGB lighting is a matter of course. It can be seen here that the light transmittance of the transparent shaft cover is good, and the light is bright and not dazzling when turned on.

Because of the wired connection, there is no anxiety about battery life at all. The built-in 13 kinds of lighting effects are dazzling and eye-catching, and it is full of gaming sense, which is very suitable for young people.

The overall uniformity of the lighting effect is also quite outstanding, with a maximum display of 16.7 million colors, which can create a variety of radiant and cool lighting effects.

Although the keycaps are opaque, the light stolen from the gaps is also very beautiful, which can bring a good lighting atmosphere and make the mood more pleasant when playing games.

Let’s do a lighting demonstration in the dark. The default is the streamer mode, which looks very eye-catching. How about it? Isn’t it very exciting.

In terms of customization, this Keychron V3 mechanical keyboard has two programming methods, QMK and VIA. Through software control, you can realize custom button settings, which is fast and convenient, and the playability of the keyboard has risen to a higher level.

In general, the Keychron V3 mechanical keyboard is a more distinctive customized keyboard. The non-floating design and compact layout make the keyboard more beautiful than traditional male models. The keycaps and shafts can be customized and replaced. , with more degrees of freedom. The Mac/Win key support is very good. It is perfectly adapted to the F-zone function keys of the Mac, and supports QMK open-source key change. It is recommended for DIY users who like texture table and feel control.

Well, this is the end of this sharing. If you have any questions about the above products, please leave me a message in the comment area, and I will answer as soon as possible! Thanks for watching, love you guys. Finally, don't forget to like, bookmark, and follow me, see you next time!