Today, with the rapid development of smart products, more and more people like portable mobile office life. For example, smartphones, tablets, and laptops are almost essential for most people to work now. For the current fast-paced life and work, improving office efficiency is the kingly way. Therefore, if the simultaneous input of multiple devices can be solved, it is also a shortcut to improve work efficiency. Just recently, Rapoo launched a XK100 Bluetooth keyboard, which solved this problem very well. This Bluetooth keyboard supports multiple operating systems such as Windows, iOS/MAC, Android, etc., and three devices can be switched freely when connected at the same time. In this way, work efficiency and office experience can be greatly improved to meet the needs of various scenarios. Here we take a look!

In terms of outer packaging, the Rapoo XK100 Bluetooth keyboard still continues Rapoo’s consistent style of simplicity and atmosphere, and the blue box reveals a sense of technology. The rendering of the product is printed in the middle of the box, the product logo and selling points are displayed in the upper left corner, and the product model is in the upper right corner.

Open the outer package and you can see that the internal accessories are very simple. Except for the keyboard host, there is only an instruction manual and a charging cable.

In terms of appearance, the Rapoo XK100 Bluetooth keyboard adopts a white design as a whole, simple and clean, and very stylish. The body size is 292*155*20mm, and the weight is 472g. The size is only a little longer than the Ipad Air. It is small and light, very suitable for carrying out.

The surface of the Rapoo XK100 has a fine matte texture material, which is not easy to slide when held in the hand. The design of this keyboard is very characteristic. It comes with an integrated card slot, which can be used to place devices such as tablets and mobile phones. The elevation angle is about 110°, which is more comfortable for reading and viewing. The length of the card slot is 360mm, and the width is 12.5mm, which can support up to 9.7-inch iPad horizontally.

The Rapoo XK100 keyboard has a flat style as a whole. The classic scissors structure, coupled with the chocolate independent keycap design with silicone particles, not only has a comfortable feel but also is quiet. The keyboard is small and exquisite, without the number pad on the right, but with a 78-key layout. The key travel of the keys is very short, the rebound is fast when pressed, and the force is quite uniform, making the typing feel more comfortable and relaxed.

At the bottom of the keyboard, you can see that the four corners are treated with arcs, and each corner is equipped with a silicone rubber pad design, which has a good anti-slip guarantee. It can meet the needs of most smooth desktop scenes, and it is more handy in use to avoid sliding.

Viewed from the side, the keyboard presents a wedge-shaped design, with a thick upper end and a thinner lower end, with a certain inclination angle. Therefore, in terms of use, placing the keyboard with both hands will have a very comfortable use angle, making typing more natural and easy.

The charging port and switch key are designed on the upper right side of the keyboard. The charging port is Micro USB. Personally, I think it would be better to use the current mainstream type-c. Push the switch key up to turn green to open, and red to close.

This keyboard has a built-in 280mAh high-energy lithium battery. It takes about 2 hours to fully charge, and it can support continuous use for about 93 hours after being fully charged. The battery life is still very good. And it also has 10 minutes of no operation to automatically enter the sleep state, such a humanized design can help improve the overall battery life of the keyboard, allowing us to enjoy the convenience brought by technology.

There are also four indicator lights in the upper right corner of the keyboard. From left to right, there are uppercase and lowercase status indicators, Bluetooth pairing indicator, charging indicator, and power-on/low battery indicator. Each indicator light will display different states in different states, for example: when the power is turned on, the green light is on for 2 seconds and then turns off, and the green light flashes when the battery is low. When Bluetooth is paired, the blue light flashes, and it turns off after the pairing is successful.

In terms of use, it is compatible with Windows, Mac, IOS, and Android systems, and the key functions are optimized according to the system, which can adapt to the needs of more market devices, and the corresponding system can be switched through Fn+Q/W/E. The connection operation is very simple, just turn on the Bluetooth, short press FN+C, enter the pairing state after the indicator light flashes, and connect to "RAPOOBT3.0" in the Bluetooth list to complete the keyboard pairing connection.

The highlight of this Rapoo XK100 is that it can connect three devices at the same time, and you can quickly switch between multiple devices by short pressing Fn+1/2/3. And thanks to the mature Bluetooth connection technology, it is also very stable and reliable in terms of signal transmission stability. For those who need to use multiple devices in daily life, it is very good that they can quickly switch and use multiple devices such as laptops, tablets, and mobile phones at the same time, which greatly improves office efficiency.

In addition, the keyboard can also operate some multimedia shortcut functions, and the commonly used multimedia functions are also engraved on the F area of ​​the keyboard. In daily work, you can quickly switch through Fn+Esc/(F1-F12) Internet, multimedia, document operation and other functions, efficient office and fun entertainment. Moreover, in terms of the key experience of the actual keyboard, the rebound feedback of this keyboard is relatively good, the typing is relatively soft and comfortable, and the sound of the keys is also very small. Now it is very convenient to use this keyboard with the iPad to write articles, saving the inconvenience of carrying a notebook when going out.

Through this period of experience, we can see that this Rapoo XK100 Bluetooth keyboard is remarkable in both appearance and function. The compact and portable body with its own card slot design, compatible with multiple devices provides us with a lot of convenience for our daily or out-of-the-box use. It supports multiple systems and three devices connected at the same time, which makes us more able to switch freely in the office, and virtually improves the efficiency of the office. Such a good-looking, multi-functional and practical keyboard is also worth starting with those who often work on the move. Friends in need, may wish to go to the Rapoo official mall to find out!

For many text workers, the keyboard is undoubtedly the most frequently used object in our daily office process. After all, as long as you sit in front of the computer, except when looking for inspiration with your mobile phone, most of the rest of the time is basically spent on the keyboard.

So for this kind of office products with high frequency of use, which ones can bring us an excellent office and game experience? Just some time ago, I also received the Hi Keys wireless Bluetooth dual-mode backlit mechanical keyboard launched by Dujia. After a few days of actual experience, I was also amazed by the excellent experience it brought. So in order to let everyone have a better understanding of this product, let me briefly analyze it for you today!

unpack

As far as the packaging design of Dujia Hi Keys is concerned, its overall style is quite smart; the packaging design of double inner and outer gift boxes not only enhances the exquisiteness of the product, but also greatly improves the beauty of the product. At the same time, brand LOGO and keyboard model information such as "DURGOD" and "Hi Keys" are also printed on the front of the package.

After opening it, you will see the main body of the keyboard of Durga Hi Keys; at the same time, it comes with a data cable, a user guide, etc. The one I bought this time is the dark blue and white light version of Durga Hi Keys.

Due to the 84-key arrangement, Dujia Hi Keys also controls the product size at 321.7×137.6×32.7mm; while retaining independent direction keys, it also takes into account the needs of many small desktop users like me; with narrow The design of the border makes the keyboard look particularly simple as a whole.

product

Compared with traditional mechanical keyboards, Duga Hi Keys’ performance in product design is also more in line with the ergonomic key curve design; even when viewed from the side of the product, it has a sense of curvature, and at the same time it is equipped with a square and round ABS key The cap design also allows us to have a comfortable pressing experience during typing.

At the same time, with the triple color scheme of dark blue, light blue and yellow used on the Duga Hi Keys, it also has excellent texture and appearance; and the full-key non-conflict feature makes it easily competent for office and games and other usage scenarios.

And in order to meet the needs of multi-device users such as WIN and Mac, Dujia Hi Keys is also compatible with the operation keys of the two systems, which also makes the product have a good performance in multi-device connection experience.

On the right side of the keyboard, Dujia Hi Keys also retains functions such as independent direction keys, DEL, HOME, and page turning; while ensuring the compact size of the product, it also retains various function keys to the greatest extent.

On the left side of the keyboard is the power switch button, which also serves as an indicator light; when the first connection is made, the indicator light will continue to flash; when the connection is completed, it will be in a constant light state.

Different from other mechanical keyboards, Duga Hi Keys not only retains a Type-C charging interface on the top of the keyboard, but also adds a knob design on the top; don't underestimate this newly added knob, it is a switching device Independent control keys for multiple connection modes such as 2.4G, Bluetooth connection device 1 and Bluetooth connection device 2.

The unique lever design allows us to easily switch the currently connected device during use, which brings us a clear paragraph feedback experience and is also quite decompressive.

It is worth mentioning that the design of the bottom of the keyboard of Durga Hi Keys is quite unique. The super large area of ​​pure black color matching with three-dimensional lines and the LOGO of "DURGOG" also show the identity of the product.

Of course, the design of the double raised feet and the design of the silicone cushion not only meet the height requirements of different users, but also increase the damping feeling between the keyboard and the desktop, which greatly improves the stability of the product.

At the same time, there is a magnetic absorption storage hatch hidden above the base, and the 2.4G wireless receiver will be stored in it after pressing and opening. This hidden design can perfectly store the wireless receiver while ensuring the integrity of the product. in.

to experience

In the actual experience process, I also found that the typing experience brought by the rounded textured keycaps used by Dujia Hi Keys can be described as quite comfortable; just press lightly to fit the fingertips perfectly, and the whole tapping process brings The feedback experience is also quite "moist".

Compared with the mainstream concave keycap design currently on the market, the tactile experience of the keycaps of Duga Hi Keys is also quite unique; it may feel a bit strange for friends who use it for the first time, but as long as you get used to it This unique tactile experience will be a unique feeling of "I can't go back".

And on several of our commonly used keys, Duga Hi Keys has made a certain raised design on the font engraving, which not only improves the touch recognition, but also allows us to have a very good tactile feedback experience during use.

In addition, Dujia Hi Keys also added a unique texture design on the space bar, which not only highlights the product texture, but also raises the overall appearance of the keyboard to a higher level.

In terms of the switch body, Durga Hi Keys also provides us with two choices of brown switch and mute red switch, and I choose the brown switch version that is more suitable for office and games. In the actual experience process, Dujia Hi Keys can bring a very good pressing and tactile feedback experience whether it is in text input, daily typing or gaming experience.

And this is mainly due to the Kaihua Turbo tea shaft design adopted by Durga Hi Keys. For Kaihua Turbo Brown Switch, it not only has an excellent sense of movement and tactile feedback, but also brings us a trigger stroke of 2.0±0.4mm, a trigger force of 40±10gf and an ultra-long service life of up to 80 million times.

In the previous article, I also mentioned that Dujia Hi Keys supports Windows/MacOS dual systems; in actual use, it can also achieve perfect switching between different operating system devices, saving us the tedious switching between different device controls.

Of course, in terms of battery life performance that everyone is most concerned about, we can also know from the official data: without turning on the backlight, the longest battery life of Duga Hi Keys can reach 360 days; even if the ambient light is turned on, The battery life of Durga Hi Keys can also reach 7~30 days, which is undoubtedly perfect for an office party like me.

Summarize

As a very distinctive and personalized mechanical keyboard, Dujia Hi Keys can perfectly meet my experience needs in daily office and gaming in terms of product design and user experience. At the same time, combined with the unique keycap design and long battery life, I believe it will also become the best choice for more friends in the process of office or gaming. If you happen to be choosing a keyboard, then you might as well consider this Durga Hi Keys!

Hello everyone, this is Tank.

Last year was the most voluptuous year for key rings. [Three-mode hot-swappable] [gasket] is basically a standard configuration for mass-produced mechanical keyboards. In the second half of the year, some manufacturers began to make efforts on [screens].

ROG released the Daredevil, a 75% triple-mode hot-swappable gasket structure mechanical keyboard on January 4 this year. As the first major peripheral manufacturer to embrace the gasket structure, half a foot enters the customization circle. Keyboard, let's take a look at the highlights of this keyboard.

PS: At the beginning, the name of ROG Night Demon, as a swordsman, the first reaction must be the hero Night Demon. I didn’t find anything in common between this keyboard and the hero Night Demon. Does anyone know the name of this keyboard? Naming stories can be told in the comment area.

It’s still an old rule, let me explain the parameters of this keyboard to everyone before the detailed evaluation

Reference price: 1899 yuan

Arrangement: 75% arrangement

Color: black

Keycap: PBT material two-color injection keycap

Axis: Mocha Brown, Hawthorn Red, Glacier Blue

Connection mode: three-mode hot-swappable

Others: aluminum shell, OLED screen, gasket, three-way lever

This article is completed by ROG night devil color matching + Mocha brown typing, but I personally suggest that it is better to choose the hawthorn red axis, which will be explained in detail later.

The outer packaging is still ROG’s classic black and red color scheme. There is a real photo of the keyboard printed in the middle, and the relevant parameters and the axis body are displayed in the lower right corner. The advantage of this is that offline sales users do not know what the axis is without opening it.

Open the outer package, the box inside is the same as before, and the ROG Prodigal Eye logo is printed in the middle of the black box.

When the box is opened, it is still an old tradition of ROG. It does not provide a keyboard cover but will provide a black woven bag with the ROG logo printed on it to store the keyboard.

Take out all the accessories, the regular manuals and ROG stickers are still provided.

It is worth mentioning that because this Daredevil is the first time that ROG has stepped into the customization circle, it provides a set of customization kits in addition to the keyboard, which are: type-c data cable, lubricating oil, metal Shaft puller, plastic key puller, type-c to USB interface, dual-purpose shaft opener, shaft lubrication brush, small shaft lubrication plate, satellite shaft spacer and three spare shaft bodies.

There is also a card under the axis running board. Scan the QR code to view the axis running and wireless usage tutorials, so as to prevent new players from not running the axis. This small detail is well done.

ROG Nightmare is a compact 75% arrangement of the F area. Because of the design of the OLED screen on the right and the three-way lever, the F area on the left is compact. F1 is directly above the number 1. Dota2 players like me who have muscle memory It's a little uncomfortable to use.

My first reaction was heavy! Heavy! Heavy!

It is the heaviest ROG keyboard I have ever played. The top cover is made of metal, dark gray anodized aluminum, and the top weighs about 1.1KG.

The upper left corner of the keyboard is the Type-C interface, the upper right corner is the physical switch for three-mode switching, and the left side of the switch is the receiver of the 2.4G storage compartment, which is magnetically absorbed. fall out.

The ROG logo is printed on the lower left corner of the keyboard, but it is basically invisible in daily use here.

The OLED screen in the upper right corner and the three-way joystick are the highlight design of ROG Daredevil. The playability of this screen is quite high. I will explain in detail in the driver later. The joystick can be moved up and down, and can be pressed down in the middle. The initial default setting is to adjust the volume, but it can be changed to other settings in the Ultra Center.

When charging in standby, this OLED screen will display the keyboard power.

The back of the keyboard or the bottom shell is made of plastic, mainly because the aluminum lump made of three-mode will definitely interfere with the new model. ROG made a concession with a metal bottom shell and plastic to ensure the stability of the three-mode signal while also retaining the feet. Design, because aluminum lumps can't be used as foot supports.

The whole is a twill design, with keyboard-related parameters printed in the middle. The ROG big eyes in the lower right corner are initially attached with a protective film. After tearing it off, it still looks good, but it is basically invisible in daily use.

The keycap is a two-color injection-molded keycap made of PBT. Personally, I feel that it is a set of keycaps used in the previous Ranger RX. The overall feel is a bit rough at the beginning, and it will not be oily after long-term use.

The character printing is centered on the top, the FN combination function key will be displayed on the side engraved position of the keycap, and the Mac system key will be printed directly below the keycap. In addition, this set of keycaps still integrates several traditions of ROG:

The ROG logo is printed under the ESC button;

As a keyboard for gamers, there is a small dot below the W button for touch typing

The last point is also a long-standing tradition, the light transmission is very good!

As for the large key, ROG uses a simple satellite switch, which is lubricated before leaving the factory, and the overall feel is not bad. Of course, it is also suitable for the steel satellite switch, and friends who need it can replace it by themselves.

It supports three-pin and five-pin hot-swappable. It has silicone sandwich cotton but no shaft pad. The shaft body can be selected from Kaihua's OEM Mocha Brown, Hawthorn Red, and Glacier Blue, which are tea-like, red-like and green-like. The one in my hand is Mocha brown. The micro-paragraph switch made by Kaihua is similar to the large-paragraph switch in advance. It is suitable for typing but not suitable for playing games. Playing games for a long time will make your hands a little tired.

The big eyes of ROG are printed on the side of the switch body. Many friends said that the problem of the leaking switch of the night devil is exactly the big eyes of ROG from the side.

If you don’t want to change the switch after you get it, I personally recommend choosing Hawthorn Red, the applicability of the red switch is better.

If there is a need to change the switch after I get it, I have changed the wallaby of Jiadalong and the CJ wall to see. If I want to continue to maintain the RGB effect of this keyboard, it is recommended to change the switch body of the transparent top cover, because it is the upper light position. Design, choosing a shaft with a non-transparent top cover with a light guide column will not enhance the RGB effect too much.

I will not explain the dismantling of the shaft body that comes with the factory. Although the shaft manufactured by Kaihua is factory-lubricated, it may not have a lot of lubricating oil, and there is still a slight rustling sound after use.

Before dismantling, let me show you the official ROG explosion diagram, and have a preliminary understanding.

It is very convenient to disassemble. Unscrew all the screws on the back to separate the metal upper cover from the plastic bottom case. However, one thing to say before disassembly is that disassembly may affect the warranty, which is not provided in the ROG tool kit. The reason for the small hexagonal wrench, so here I use the wrench provided by Wuque.

After disassembling, pick up the metal cover, and remember to unplug the connection between the PCB and the main control. The layer covering the connection is Poron cotton, which is placed under the PCB to have a certain noise reduction effect when the shaft is triggered.

Open the PORON cotton to get the related accessories of the plastic bottom case. The Nightmare is the most complicated internal structure among the mass-produced keyboards I have disassembled. The left side is the wireless antenna and the main control module, which are respectively connected to the PCB and the right side. The OLED display is filled with a black silicone pad to ensure the stability of the overall structure.

There is also the ROG logo on this silicone pad, and the details are full.

A plastic plate is used to clamp the battery on the upper part of the battery compartment to prevent the battery from shaking and also prevent the shaft pins from directly contacting the battery surface, reducing safety issues in use. After disassembly, it can be seen that it is a 3820mAH battery. For the production keyboard, it has a larger capacity.

Speaking of the inner tank, the shaft seat is TTC shaft seat, and there is a layer of 3.5mm silicone sandwich cotton between the metal positioning plate and the PCB. ,

However, TTC shaft seat + Kaihua customized shaft body, I can’t comment on this combination

The noise reduction effect of the silicone sandwich cotton is average. I originally bought the PORON sandwich cotton from Fried Shrimp Granules, but when dismantling the screws on the back of the PCB, I didn’t use many types of screwdrivers. As a result, the two screws were slippery and I couldn’t disassemble and replace the sandwich cotton. , if you are reading this article and plan to dismantle it, you must pay attention!

Looking at the dismantling of other bloggers during the evaluation, there is also a ROG logo on the PCB board of the Daredevil, which is quite careful.

Give this sandwich cotton back to someone who is destined, it's a big head.

You can set the buttons, lights, levers, OLED screen, power, etc. of the Nightmare through the Altron Center. The buttons are conventional modifications, but ROG supports setting 5 different schemes. You don’t need to start the Altron Center in the future, just FN +1~5 can switch settings.

In terms of lighting, the factory default is 50% brightness. Like me, friends who like it can adjust it to 100% by themselves. This Daredevil also supports Shenguang synchronization. It is better to use it with other ROG products.

Here is also a picture of the RGB lighting that I put together four ROG keyboards. You can compare the RGB effects of different ROG keyboards.

By default, the lever is used to adjust the volume of the system, and it can also be changed to switch songs, adjust brightness, and switch lighting effects according to your own needs. Of course, you can also customize it.

The last thing I want to talk about is this OLED screen. You can choose existing animations or upload them yourself, but there are not many preset animations. It will be more fun if you can enable players to share with each other in the future.

Secondly, gif can only upload a maximum of 196 frames, which is relatively limited.

I use this banner function more often. I can print my ID on the OLED screen. There are many fonts to choose from. Formats such as bold, italic and underlined are also supported, and the font size can also be modified.

There is no limit to the length of the text. If the text is too long, the banner will scroll horizontally, which is quite fun.

As a gaming keyboard, I must talk about the gaming experience. Personally, I have a good experience playing dota2. However, due to the compactness of the F area, F1 is not suitable for selecting heroes, and F2 and F3 are slightly uncomfortable when controlling the messenger, and then it is also in wireless mode. After experiencing LOL and playing a few battles, the overall feedback is good, and there is no problem with the button release skills.

In addition to moba games, you definitely need CSGO experience, frequent A-D-A-D peek, jumping and throwing props, keyboard feedback, no problem, no lag, but due to the use of Mocha brown switches, I am a little tired after playing a few CSGO games, so I personally recommend it It is better to choose hawthorn red.

On the whole, ROG’s night demon made a good demonstration for the key ring and various peripheral manufacturers at the beginning of 23, but because ROG has always been a mid-to-high-end brand, its price has also come to 1899 yuan, friends with sufficient budget can Consider getting started.

advantage:

Three-mode hot-swappable gasket structure keyboard, the internal padding is relatively solid

The OLED screen has high playability and is very recognizable

The three-way lever made of metal has a good texture and is more convenient to use

The RGB effect is good and it also supports SG sync

There is basically no disconnection problem in the three-mode connection, and the wireless convenience and delay control are very good

The internal structure is well handled, the battery compartment protection is also good, and the wireless battery life is strong

Disadvantages:

The bottom looks a little bit leaky

The compact area of ​​F is not very friendly to dota2 players

Occasionally there is a small bug on the screen, if you select the banner first and then upload the picture yourself, you can still see the text of the banner

The above is to bring you all the evaluation content of ROG Night Demon this time, I hope you can like it~

I am Tank, and I will bring you more keyboard content in the future. If it is helpful to you, you may wish to like and support it. Your three links are the greatest encouragement to me!

Kaihua has launched a light-sound axis with a linear feel. It adopts Kaihua's mute patent and is refined by the manufacturer. It will be sold in limited quantities on Tmall and Pinduoduo at 2:14 pm on February 14th.

This shaft body is equipped with Kaihua MX silent structure technology. The appearance adopts a light pink dustproof wall structure shaft core, and the base is the same color. The official name is canvas white color matching.

The light tone switch uses a transparent top cover to reduce the impact on the keyboard lighting effect. In terms of core parameters, the soft tone shaft adopts a long spring, the trigger pressure is 45gf, the conduction stroke is 1.9±0.4mm, the total stroke is 3.7±0.3mm, the key life is 80 million times+, and the factory comes with a factory moisturizer, eliminating noise without secondary lubricating.

As an IT practitioner, the computer is an indispensable part of my daily life. Since I use it a lot, I attach great importance to the control experience, especially the mouse and keyboard, which must be handy. When it comes to feel, the mechanical keyboard is doing my part. Recently, I saw Dujia launched a new mechanical keyboard: Hi Keys. It adopts a simple layout of 84 keys, which is very stylish from appearance to color matching, which makes people unforgettable. So how does this keyboard work? I just got one, so follow me to try it out.

Dujia's mechanical keyboards have always been outstanding in appearance, and this Hi Keys has put a lot of effort into the appearance, which looks more modern. Let's take a look at the packaging first. The pure black carton with eye-catching handwritten model, coupled with artistic lines, gives people a bright feeling.

Durga Hi Keys has two colors to choose from, dark blue and silver. You can also see the appearance of these two models on the back of the box. Each model is matched with multi-colors. It is really difficult to choose, because they are all good-looking. Thinking of the white backlight used in this keyboard, I think the white version may be more eye-catching in use.

The following are all the items in the package. Except for the Durga Hi Keys mechanical keyboard body, it is mainly a Type-C cable and a user guide. As a mechanical keyboard, it is a bit surprising that it is not equipped with a key puller.

Let’s take a look at the appearance of the keyboard. The size of Duga Hi Keys is 322*138*33.7mm. It uses an 84-key design without an independent numeric keypad, so the overall appearance is very small, but the weight is 826.5g. The material is very solid.

I have used many mechanical keyboards, most of which are horizontal and vertical, but Duga Hi Keys is a little different. From the side, it has a slight curvature as a whole. This design even runs through every keycap. Looking at this small change, it makes the entire keyboard look vivid.

Looking down from the top of the keycap, it feels like a square with a little roundness, which is really different. The keycaps of Dujia Hi Keys are made of ABS material, with clear engraving and delicate touch, which can ensure that the surface will not produce oily shine after long-term use, and the front of the keycap adopts a two-color closed molding process, which can effectively prevent characters from wearing or fading And so on.

For mechanical keyboards, the shaft is the most critical part. Next, let's take off the keycaps and take a look. Although Dujia didn't come with a key puller this time, it's not a problem if you play a lot with the keyboard. Durga Hi Keys currently has two types of switches: red switch and brown switch. You can tell from the color that mine is a brown switch, because I prefer a segmented feel, and every tap can have a clear feedback.

The workmanship and feel of the keycaps are quite good, and the handwriting on the surface is very clear and neat, and it is quite artistic.

The charging interface of Duga Hi Keys is the most popular TYPE-C nowadays, and the interface is located on the back of the keyboard, which does not affect the appearance at all.

The Duga Hi Keys mechanical keyboard adopts a wireless dual-mode design. There are two Bluetooth channels and a 2.4G connection mode. The switch is a knob on the back, which has a clear sense of position when rotating.

Let’s take a look at the bottom of the keyboard. It is designed with two non-slip feet and two tiltable brackets that can be folded. After being supported, the slope can be further improved, which can bring a more comfortable experience. There are also anti-slip pads on the bottom of the feet. Details Well done.

There is also a storage compartment for a 2.4G wireless receiver at the bottom of the keyboard. It is worth mentioning that Dujia designed the cover as a magnetic suction type, which can be opened by gently pressing one side, which is really convenient .

The switch of Durga Hi Keys is located on the side. It is a round button. When it is turned on, it will light up a white light, which is very beautiful.

Turn on the switch of Durga Hi Keys, and the white backlight will light up, which is not fancy, but very practical, and the letters on the keyboard can be clearly seen in low-light environments. And it can also switch 8 atmosphere modes through Fn+F2, and the effect is equally cool.

In terms of feel, its keys have a more obvious sense of paragraph, and the key travel is moderate, and the feedback is very comfortable. Its large key position uses carefully adjusted satellite switches, which can also bring a smooth feel.

This keyboard is suitable for a wide range of scenarios, whether it is office typing or gaming, it can be very competent. Its key feedback is fast and clear, and there is no obvious sound when typing, even if you play games at night, it will not be noisy. Looking at others.

When pairing via Bluetooth for the first time, a random six-digit number will pop up on the screen, which needs to be entered in sequence on the keyboard, and then press the Enter key to successfully pair. This method undoubtedly increases security.

Durga Hi Keys supports simultaneous connection of 2.4G wireless and two sets of Bluetooth devices, and can switch freely between three devices, and there is almost no waiting time. It is simply a powerful tool to improve efficiency during busy work.

Finally, I want to talk about the battery life of Duga Hi Keys in particular, because its battery life is far beyond my knowledge of wireless mechanical keyboards. In the case of not turning on the light, the Bluetooth mode can be used continuously for 365 days. Of course, this is the official figure, because it is only half a month since I started, and I have not had the opportunity to use the battery warning. However, if you can really achieve this kind of battery life, it will be really impressive.

In general, the Duga Hi Keys wireless bluetooth dual-mode backlit mechanical keyboard brought me an experience that exceeded my expectations. It has a high appearance value and a very modern design. In terms of hand feel, the tea shaft has a clear sense of paragraph and is very quiet, which can be applied to various occasions. In addition, it supports wireless dual-mode, which can connect multiple devices at the same time and switch freely. If you are also a mechanical keyboard lover, this keyboard is a very worthwhile experience recently.