With the development of the information age, computers are now available in almost every household, and there are many smart devices used in daily homes and offices. It is often encountered in switching between different devices such as computers, tablets, mobile phones, and even different systems. Now, it becomes even more important to match these devices with a thin, light and lightweight keyboard that supports multi-device wireless connections. Rapoo has launched the new E9550G multi-mode wireless blade keyboard, and then follow Huihui to see how this keyboard performs.

The packaging style of the keyboard is the blue tone of the Rapoo family. The front is a top view rendering of the keyboard, allowing users to have a general understanding of the appearance of the product. The upper left corner is the Rapoo brand LOGO, and the upper right corner has a striking model logo , and the yellow part in the lower right corner prominently identifies the main functions of the product.

The specific product features and related information are printed on the back of the package, and the four major selling points of the keyboard are expressed in four languages ​​including Chinese. The characteristics of the Rapoo E9550G keyboard are as follows: 1. Multi-device adaptation intelligent switching; 2. Bluetooth 3.0/Bluetooth 5.0/Wireless 2.4G three modes; 3. Built-in rechargeable lithium battery; 4. Floating chocolate buttons, feel comfortable.

There is also a layer of white carton packaging inside the keyboard. The white carton on the left is the main body of the keyboard, which is wrapped with pearl cotton film to prevent scratches. In the white paper box on the right is the charging cable of the keyboard and the 2.4G receiver.

After the keyboard is unpacked, there are accessories: keyboard body, manual, warranty card, charging cable and nano receiver.

The multi-mode wireless blade keyboard E9550G is available in black gray and white colors. Huihui received the black and gray version, which is low-key and restrained, suitable for business office. Compared with E9350G and E9050G, it is more suitable for office. The body adopts a full-size solution, and the size is about: 420mm*115mm*13mm. As a blade series, it is amazing that the thinnest part is only 5mm, and the metal shell controls the weight at 394g, which is obviously thin and light. Viewed from the side, the keyboard is wedge-shaped, similar to the blade, which is probably the origin of the blade keyboard.

The multi-mode wireless blade keyboard E9550G frame and back panel are made of aluminum alloy, which is frosted, anti-corrosion and anti-falling, and presents a delicate metal texture; there are five rectangular non-slip feet on the back panel, which can be placed flat on the desktop and can be Eliminate the trouble of sliding; the edges and corners are handled in place, round and not sticky.

Floating chocolate keys, similar to the feel of notebook keys, the stroke of the keyboard keys is 1.5mm longer than that of the notebook, and the process of pressing is tight, with a slight damping feeling, the noise is very small when tapping, the keyboard integrity is good, not There will be a loose feeling, and the arc concave surface of each button can better fit the curvature of the user's fingertips, and the touch feels comfortable and free.

The power switch, USB Type-C charging port and Bluetooth module are provided on the top side of the fuselage. The position of the Bluetooth module is covered with plastic material, which can prevent the metal package from interfering with the signal. The plastic material can make the wireless connection more stable and not easy to disconnect.

The keyboard is a three-mode connection, respectively, Bluetooth 3.0, Bluetooth 5.0, and wireless 2.4G. The data cable with the keyboard is a charging cable and cannot function as a wired connection. Plug and play is supported in 2.4G mode, making this keyboard easier and more convenient to use. Bluetooth mode can be connected to three different devices, you only need to press and hold Fn+1, Fn+2. or Fn+3 each time you switch to connect to the corresponding Bluetooth device.

The keyboard uses a built-in lithium battery solution. The 300mAh battery capacity cooperates with Rapoo's low-power chip and energy-saving technology. It can provide about 60-96 hours of battery life after being fully charged, which is enough for daily use. Through the USB Type-C charging interface, it can charge about 20% in 10 minutes, and it takes about 2 hours to fully charge.

To sum up, Rapoo E9550G is equipped with Bluetooth 3.0, Bluetooth 5.0, wireless 2.4G multi-mode connection, and can connect and match multiple devices, which is in line with the usage scenarios of modern people. Moreover, the keyboard is very thin, stylish and beautiful. The most important thing is that the keyboard keys have the characteristics of mute, so that they will not disturb others during daily typing.

With the improvement of players' demand for individualization, many manufacturers have followed the trend and launched many keyboard products with a lot of selling points in the past two years. With the emergence of competing products, there are leading brands relying on brand advantages, and many domestic upstart brands that take the ultimate cost-effective stacking style have emerged. These products all have sincerity-level pricing that is visible to the naked eye.

Today I will bring such a stacking work: CL98 from the Click lab brand. I hope that this unboxing from the user's perspective can give some comparison references to friends who are interested in buying such products.

CL98 has been iterated to 3.0, which is known as the full body version. Based on the technology and experience of the previous generation of products, this time the product will be more mature.

Click lab CL98 is currently available on Taobao. Users can choose a single kit (without shaft and keycap 419), TTC gold powder V2 (699), CL custom shaft (TTC OEM 599), etc. TTC has been out of the circle since gold powder isometric bodies After that, relying on the good quality, stable performance and word-of-mouth of its own products, it was well received in the customization circle, and its feel quality is also relatively credible.

In terms of accessories, in addition to the regular manual, C-mount threaded rubber cable, and key puller, it also comes with a transparent dust cover, additional key caps, and replacement shafts*4.

Click lab CL98 adopts a practical and relatively compact 98-arrangement key design. The compact layout makes the keyboard more refined and outstanding in appearance compared with 104 and other full-size keyboards. White, as a fashionable evergreen color, also has a very good appearance when matched with black and white themed keycaps.

The 98 configuration removes the editing area, retains the direction area and the number area, retains the uppercase and lowercase and number indicators, and the maximum bar light used to display the connection and lighting effect status. It is also very recognizable with the nameplate decoration of the top brand logon.

The two indicator lights are close to the keys, very creative, intuitive and easy to understand.

The left and right win buttons adopt a coverable design, and you can choose the normal arrangement or the front teeth (friendly to the game scene). The adjustment of the win on the right and the direction area is very reasonable and harmonious for me. 98 and 65 arrangement are also my personal favorites. I like the practical arrangement of the keyboard.

The brass-colored inscription on the top is very decorative. Although it is a plastic shell, it enhances the texture.

I don’t know if the 2.4g storage compartment on the back is a case or a design reason. The magnetic sheet attached to the back cover fell off, which made the back cover unable to close, which is a bit regrettable.

The four toggle switches respectively control MIC, WIN switching, power supply, Bluetooth switch, and 2.4G mode. I personally prefer physical switches, which are easy to use and have a strong sense of confirmation in functions with low frequency of use. The area is a constraint, and it is more flexible and slender when you need to switch.

The details at the edge turning are still in place, and there is no low-level flaw in the eyes.

In terms of the switch body, the click lab switch (cl) manufactured by TTC has not been released by the official. The cherry red switch is convenient for everyone to understand that it has a linear feel. Since the expiration of the cherry patent, the mechanical keyboard switch has also been available in a variety of versions. This CL axis is composed of a PC transparent upper cover with a POM axis, a nylon lower cover and a long spring. The trigger pressure of about 42g is also the most popular force range of the current linear axis, and the friction triggered by pressing is optimized. And spring sound and shake feeling. The friction and spring sound and shaking feeling triggered by pressing are handled well.

The consistency and smoothness of pressing are unexpectedly high. Visually, it has been lubricated by the factory, and there are not many shafts that have been touched. However, compared with the price of TTC gold powder, I personally feel that the cl shaft may be more cost-effective.

In addition, the PCB and POM positioning board are filled with PORON sandwich cotton, ixpe shaft underpad, and silicone bottom pad. The investment in these customized kit matching solutions brings the percussion cavity sound and shock feeling that mass-produced keyboards have. Common problems have been greatly eliminated. And thanks to the separation of the Gasket small board and the PCB and the help of the filler, the pressing under the leaf spring structure also has a certain soft elastic feeling, and the overall feel feedback is quite good.

Hot-swapping is also a standard configuration of many keyboards nowadays. For novice users, it can greatly improve the DIY and playability of the product, and lower the threshold for customization. It is also very simple to change the shaft. Use the shaft puller to press the shaft Gently pry the lid open. With the included key puller, you can easily replace the diy shaft body. It is also compatible with ordinary tripod and pentapod axes, as long as it is an MX-like axis. The shaft body adopts LED and transparent shaft cover, and the SMD LED at the bottom of the upper light position design is also relatively clear and obvious, and the keycap design has a tight gap, and the light is not dazzling.

The keycap is PBT two-color injection molding, with clear characters and elegant style, moderate thickness, fine and smooth surface, and dry and delicate touch. Supplements and even seven-character carriage returns are compatible with other keycaps.

In terms of connection, the Click lab CL98 three-mode wireless hot-swappable mechanical keyboard supports Bluetooth and 2.4G wireless connections. Its anti-interference and stability performed well during the experience period. The Bluetooth connection typing test of the computer/mobile phone was carried out respectively. During the experience process, there was basically no sense of delay. Although the stability needs to be verified for a long time, the field office The use of input requirements can be fully satisfied. And it can match three devices at the same time, and the delay of the second cut is almost impossible to check, which is very useful for multi-device users.

The battery life of the keyboard is also good. The official 3000mAh lithium battery does not provide reference data, but according to the battery life experience of several wireless keyboards with similar capacity I have, it is estimated that the Bluetooth mode/2.4G mode can give almost 200 days. / About 150 days plus the keyboard itself is not very mobile and can be supplemented by plugging in according to the power indicator at any time and supports wireless Qi charging. In theory, there is almost no constraint and anxiety of wireless use.

The compact layout makes the keyboard more refined and outstanding in appearance compared with full-size keyboards such as 104, and it is only a little longer than the 65 layout, while the reservation of the direction area and the number area makes it more practical and practical than other small layouts. It is convenient, and because it occupies a small space on the desktop, it is very friendly to students and cost-effective parties.

Judging from the experience of several days, this is a relatively mature cost-effective stacking product launched by emerging manufacturers after several iterations. The black and white color matching and styling have a very versatile appearance. PBT keycaps, the most popular and well-recognized gasket structure scheme, and TTC customized shafts bring quite good feel feedback. Compared with the mass-produced competing products at similar prices, it is still very cost-effective, of course, there are some in the experience. Defects, such as the falling off of the bottom storage compartment cover and the detailed experience of the toggle switch, have room for improvement, but in general, the impression and experience this time are quite good. Combined with the price of a certain treasure 599 and the evaluation feedback of the hands-on group friends, it is quite worth recommending to practical users.

The aluminum factory recently released a new F97 keyboard with a new coating. I found that the aluminum factory has not made drastic changes in hardware research and development recently, but has gone further and further in the design and creation of keyboard coatings. It is a big brain hole.

The reason why it is said that the aluminum factory has gone further and further in the concept of artistic creation is because, from the earliest pure color matching of two or three colors, the unknown number of patterns on a few buttons, Star Trek and other styles to the later styles with obvious themes are getting more and more Most of the large keys have roaming guides and ski styles with comic patterns. Now there are four colors on a keyboard, and each large key has a graffiti diary with different patterns. It is enough to see that the aluminum factory The determination in design must unswervingly follow the design route of differentiated color pattern matching.

This time the graffiti diary model, the main color is black and white, with a large area of ​​red and a few yellow. It makes the keyboard look very young and energetic as a whole, and the same contrasting color design also shows the unruly personality of young people.

The multi-element illustrations on the buttons also give each big button its own individual expression.

The border of the keyboard provides three colors of black, white and red, which can be selected according to your own preferences. I personally think that the red border is the most beautiful and has a distinctive personality. The white border is clean and fresh. Black is low-key and restrained with a sense of sullenness.

In terms of hardware configuration, there is no obvious difference from the previous skis. The keyboard has a built-in 4000mAh battery, which has a good battery life. It also supports the USB Type-C interface and the design of charging and using at the same time, which is very user-friendly and convenient. But be careful not to use the fast charger to charge the keyboard, it is recommended to use a 5V 1A charger.

This keyboard in hand uses a hot-swappable base, which can use mainstream three- and five-pin switches. We can easily replace the switches we like, which can realize the possibility of multiple switches on one keyboard and greatly increase Keyboard playability. The feel of the gold powder switch is undoubtedly the smoothest, delicate and lightest among all the switches, with no obvious sense of paragraph, and the rebound speed is moderate. Belongs to a more versatile shaft. But if you are used to the axis with a sense of paragraph, it may take a while to get used to it for the first time, and sometimes you may forget what to type in the next word for a moment because of the lack of sense of paragraph.

The packaging accessories are still so complete, including key pullers, data cables, receivers, adapters, spare keycaps, and MAC keycaps.

write at the end

IQUNIX F97 Graffiti Diary frees itself and fully demonstrates its personality. This appearance is unique and unique. In terms of hardware, PBT keycaps, three connection modes, hot-swappable shafts, RGB backlight, almost all the functions you want on a mechanical keyboard can satisfy you, and the excellent percussion feel and long battery life are also impressive. satisfy. In today's society, good looks are the norm, and everyone is at the same level in terms of hardware. What they strive for is the sense of design. This doodle diary is a good example of this. I look forward to the aluminum factory continuing to let itself go and design keyboards with more creative appearance and coating.

Wandering around in Xianyu, I accidentally discovered a certain trash guy hanging out a Fujitsu cord-cutting keyboard. The seller did not mark the model number of the keyboard, but from the blurred writing on the back label paper, it can be seen that this keyboard is the legendary king of membrane keyboards FKB-4725. I haven't played with Fujitsu's keyboard before, so I gave it a try.

When I got it, I found that the keyboard was quite dirty and covered with dust. Although the keycaps are complete, the ESC key has been broken. Pressing a few buttons casually, the experience is very bad, and the jam is serious. I also bought an IBM Model M before, and the buttons of the Model M are still very crisp and neat even when it is covered with dust. The legendary film king, is this level?

The shell of this keyboard has no screws at all, and the upper and lower covers are connected by snaps. Use a crowbar to carefully pry open the buckle, then you can separate the upper and lower covers, and take out the inner tank in the middle.

The moment I saw the liner, I deeply felt a chill down my back. In addition to the serious dust in the keyboard, the steel plate is also seriously rusted. If it can rust like this, it is likely to have been in water, or it has been stored in a humid environment for a long time. This time, there is a high probability that the car will overturn.

The main control circuit board of the keyboard is positioned on the back of the steel plate through screws. The membrane circuit of the keyboard is connected with the main control circuit board through the membrane cable. On the far right of the main control circuit board, there is also a 5P plug, which is connected to the keyboard cable of the PS2 interface.

Take a closer look at this rotten ESC key. It can be seen that the top of the box board is covered with dust, and the steel plate underneath is also rusty. The key sticking is probably due to too much dust ingress, resulting in serious friction between the key and the guide rail. Since several keys could not be played, I decided to clean the keyboard first, let the keys recover, and then test whether the keys are good or bad.

This Fujitsu Peerless button, like the IBM Model M, has a double-layer keycap. But its keycap is tighter than that of Model M, and it is not easy to pull out. The upper keycaps of the Model M can basically be broken off with bare hands, while the Fujitsu peerless has to rely on a cap puller. According to my personal experience, using a cap puller like the one pictured above is easier to insert into the keycap because of its thinner outer wall.

It is easier to pull the cap puller stuck at the upper and lower ends of the button than at the left and right ends. First, put the cap puller in a position a little to the left, pull it out, and pull out the left side of the keycap, then move the cap puller to a position a little to the right, and pull out the right side, so that the entire keycap is completely Pulled out.

Its big key is buckled on the bottom keycap on one side, and inserted into the next cylinder through a round rod on the other side.

The keycaps that were pulled out were really dirty. Take a bath with the advanced ultrasonic cleaning machine.

Under the action of ultrasonic waves, a large amount of dust immediately muddied the water.

The keycaps on the bottom layer are stuck on the top of the casing board through buckles, and it is difficult to pull them out if they are hard to pull out. You need to use other tools to pry the buckles. But because there are both left and right sides of the buckle, if you pry the left side open, the left side will slide back if you are not careful when you get the right side. Since it is too difficult to handle, let's first disassemble the steel plate on the back to see if it is better to remove it from the back of the box board.

Unlike Model M, Fujitsu's steel plate and casing are fixed by screws and buckles and are detachable. However, there is a huge problem here, that is, due to the rust of the screws, several of them have slipped. In the end, I had to use an electric grinder to re-carve slots on a few rusty screws, and then unscrew them with a flat-head screwdriver. It took a full night to remove these rusty screws.

Remove the steel plate, and there are two layers of thin film circuits underneath. It can be seen that the rust stains on the steel plate have also corroded to the film.

Remove the film, and you can see the bobbin board and the rubber bowl layer.

Under each lower keycap, there is a short spring. There is also a section of white tube under the spring, which is used to press down the rubber bowl, so that the two layers of film are in contact to complete the triggering of the button.

The key structure taken from the front, upper keycap--lower keycap--spring--white tube

After completely removing the plastic bowl, spring and other accessories, I studied it and found that it is easier to pry the lower keycap with a long and thin hard object extending from the back of the tube board. When prying, pull the keycap up with one hand to prevent the snapped buckle from sliding back, and then quickly pry the buckle on the other side.

It took another two hours to pull out all the lower keycaps except the space. There is a balance bar on the blank, and the balance bar is stuck on the top of the tube board. I was afraid that the balance bar would be damaged when pulling out the keycap, so I didn't touch it. And the space bar itself is not too astringent, it is estimated that it can be washed with water.

All keycaps are cleaned with an ultrasonic cleaner. Rinse the entire cheese board with a tap, and then brush it with a soft brush. The keyboard is cleaned and the keys are finally not jammed. Ready to try the keys. This keyboard has a PS2 interface and cannot be connected to a laptop. A PS2-to-USB converter is required. Before connecting to the converter, you need to determine the line sequence of the keyboard.

Here also share the method of determining the line sequence of the PS2 keyboard. The primary goal of determining the line sequence is to determine which is VCC and which is GND. The two poles of the power supply are confirmed, and the keyboard will not burn. It can be seen that there is an electrolytic capacitor next to the 5P keyboard cable socket. This large capacitor is usually directly connected to both ends of VCC and GND to stabilize the input voltage. Use the on-off gear of the multimeter to see which terminal on the 5P socket is connected to the positive and negative poles of the capacitor, and you can judge which is GND and which is VCC.

Even without a multimeter, the positive and negative poles of the power supply can be judged through the lines on the circuit board. It can be seen from the circuit board that there are two sets of lines that are particularly thick, and these two sets must be the positive and negative poles of the power supply. On the far right of the circuit board is a large metal ring (tinned copper?), which is used to conduct electricity with the steel plate on the back, and is a shielding layer. The shielding layer is connected to the left layer of wiring through the front wire, and finally connected to the second and third pins of the socket. It can be judged that the second and third pins are both GND. And the first pin is connected to another very thick line through the front wire, which must be the positive pole of the power supply.

After confirming VCC and GND, CLOCK and DATA will depend on it. If you are not right, reverse CLOCK and DATA. The final line sequence tested is black VCC, red GND, green DATA, and brown CLOCK. The bullshit chip in the picture above is a PS2-to-USB conversion chip, which was removed from the PS2-to-USB converter on Taobao.

Although the wiring sequence of the keyboard was successfully tested, the old keyboard was overturned. Connected to the computer test, it was found that more than half of the buttons were not triggered. Due to long-term moisture corrosion, there are disconnections in many places on the thin film circuit. The most terrible thing is that the wires on the film are covered by a green protective film. If you want to repair it with conductive silver paste, you must first remove the green protective film. There is no way to remove the protective film except for sanding. It is too difficult to use sandpaper to just wear off the protective layer without damaging the underlying circuit.

As far as my personal experience is concerned, I feel that the playability of Fujitsu FKB-4725 is far worse than that of IBM Model M. First of all, Fujitsu's ability to resist dust is far worse than that of Model M, and it is much more difficult for Fujitsu to disassemble the keycap for cleaning than Model M. Even if Fujitsu is in a normal state, its input experience is far inferior to that of the Model M squat spring. Its input feeling is probably on the basis of ordinary membranes. Due to the addition of springs, the keys are more handy when they rebound. I think its input experience is not as comfortable as the large paragraph feeling of a high-quality plastic bowl membrane keyboard.

Hello everyone, I am Taotie

The slogan "Appearance is justice" seems to be applicable to the key ring as well. After all, the beautiful and exquisite appearance can always leave a deep impression on consumers, and it is also one of the driving forces for buying hands. Therefore, in the face of such an involuntary keyboard market, various manufacturers have racked their brains to innovate their own appearance designs, get rid of the shackles of male models, and find their own "appearance".

As a fanatic of mechanical keyboards, I have been playing keyboards for some time. In my mind, there are few mass-produced keyboards that can attract me by their appearance. But when I saw this keyboard, I was not calm all of a sudden, because its appearance is so good, it is definitely the TOP1 appearance in my heart so far, then this keyboard is from Hubatu ——
Hubatu F75 three-mode mechanical keyboard
。

Maybe you will feel that this brand is a little strange, but a good product never needs a story and a background, not much to say, see the details in the text.

The packaging of the Hubatu F75 adopts a light, luxurious and minimalist style, with a hot stamped keyboard sketch printed on the front.

In the lower right corner, you can see some product features and the words F75.

When you open the box, you will see the main body of the keyboard. Cushion foam is added on both sides, and the protection is sufficient.

The accessory box is also designed with bronzing sketches, which is very delicate.

After opening, you can see that the interior includes aviation plug helix, key puller, shaft puller, keyboard cleaning kit, magnetic kick stand, dust cover and other related accessories.

The content is rich, and the quality is quite high, even if it is taken out and sold separately, there is no problem.

I have to say that when I first saw this Hubatu F75 three-mode mechanical keyboard, I was instantly amazed. Even my kids were full of praise when they saw it.

The one in my hand is the theme of cold river snow. In order to match such a poetic artistic conception, the keycaps are matched with blue gradients. From top to bottom, from shallow to deep, the transition is natural and natural, such an excellent appearance The design directly enhances the visual impact of the entire keyboard.

The shell of the keyboard is made of light blue plastic material, with smooth edges and delicate touch, which also complements the theme of Hanjiangxue.

Since it is F75, it means that this keyboard adopts an unusual 75% arrangement, that is, the number area and some function areas are cut off, and other keys are retained. Of course, the advantage of this is to reduce the size of the keyboard and the space occupied by the desktop. At the same time, in order to improve the practicality, the direction keys and some commonly used function keys are divided into independent areas to prevent accidental touches.

A 1.14-inch LCD color screen is added to the upper right corner of the keyboard, on which information such as time, mode, and power can be displayed, and GIF animations can even be added through software.

In addition, a large metal ring is added to the side position, and the volume can be adjusted in real time by rotating it. Compared with the popular round knobs, this hidden structure is not only more exquisite, but also conforms to the operation logic of fingers, which is definitely a highlight design.

The light bar is hidden in the middle of the keys.

Various keys are placed on both sides of the keyboard, the right side is the wireless connection switch and the WIN, MAC system switching key, and the left side is the power switch key and the power cord interface.

The top design of this Hubatu F75 three-mode mechanical keyboard is also surprising. The through-type dark blue nameplate is printed with the brand's English logo and the Chinese character theme of Han Jiangxue. The outer ring of the nameplate is inlaid with shiny chrome-plated decorative strips, and the texture is full at once.

Turn over the bottom is relatively simple, the middle position is the nameplate made of metal, and the cartoon pattern of the tiger and the rabbit on it.

After opening, the following is the storage compartment of the 2.4G receiver.

Although there is no folding foot support, the angle can be adjusted appropriately by selecting magnetic modules of different heights to meet the needs of different players.

In terms of the switch body, this Hubatu F75 three-mode mechanical keyboard uses TTC’s Neptune switch, which is also good in appearance. The transparent switch core is matched with a blue top cover, which has a visual aesthetic of ice and snow.

Tried it out, the shaft is a linear shaft with a red-like setting, the trigger pressure is 41gf, and the total stroke is 3.8mm. The conduction stroke is 2.0mm, but compared with the ordinary MX axis, a full-length guide rail is added inside, so the hand feels more comfortable and smooth, and the hand will not be tired when coding for a long time, and the bottom is quiet, without noisy irritability.

The position of the large key adopts the traditional steel plate satellite shaft, the dummy shaft is installed firmly, and the interior is filled with grease, which does not shake or flesh, and has no wire sound. In addition, in order to reduce the cavity sound, noise-absorbing cotton is added to the bottom of the large key to improve the sound performance.

Here's an actual percussion sound performance.

Through the video, it can be found that the overall performance of this Hubatu F75 three-mode mechanical keyboard is quite good, thanks to the internal Gasket structure, plus the soft elastic PC positioning plate, which reduces the impact of pressing Force, and proper elastic deformation also helps to improve the rhythm of the linear axis.

The PCB has a hot-swappable base, and players can replace different shafts according to their own needs, which increases the playability.

In order to achieve the effect of gradient color, the keycap of this keyboard adopts the dye-sublimation process of Fingertip Wenchuang. It can be seen that the details are quite delicate. There is no excessive printing and dyeing on the edges of the characters, and there is no flashing burr at the bottom. The large keys are straight and without deformation.

The keycap is made of PBT material, which is more wear-resistant and durable than ABS. The end surface has a slightly frosted texture, and the feel is smooth and delicate.

The height of the keycap adopts the structure similar to XDA short ball cap, and the end surface area is large, which is convenient for the positioning of fingers. At the same time, the ergonomic arc of R1-R5 also makes the tapping comfortable and easy.

In terms of connection, this Hubatu F75 three-mode mechanical keyboard has wired, Bluetooth, and 2.4G three-mode connections to meet the connection needs in different scenarios. After typing a paragraph of text, the connection is stable and has no delay, which is enough for daily use. In the bluetooth mode, you can switch the connection of three devices through FN+QWE.

After power on, this small LCD display can display relevant values, including date, battery, time, system and connection mode, which are very comprehensive. At the same time, the display on the color screen is clear enough that you can see it when you look up.

For such a cool keyboard, RGB lighting effects are naturally indispensable. There are 18+4 lighting effects such as dynamic breathing, spectral cycle, starry dots, and music rhythm. Unfortunately, because the keycaps are not transparent, it is a The background light is more appropriate.

In terms of battery life, a large 4800mAh battery is added inside, coupled with reasonable sleep settings, so that this keyboard can last for a day without turning on the light, avoiding your battery life anxiety, and playing unlimitedly.

It has to be said that the current mechanical keyboard market has become different from what it used to be, and the rise of domestic brands has also kept this Red Sea in rough water. Faced with such fierce competition, only continuous breakthroughs and innovations can attract more consumers' attention.

The Hubatu F75 three-mode mechanical keyboard displayed this time is the ultimate product of this era, a real super hexagonal warrior, regardless of appearance, axis, feel, function, and practicality. Board, if you insist, the price may be slightly higher. But after all, it has reached this level, maybe this shortcoming is not its, but yours.

So, if you ask me to recommend a keyboard that can be done in one step, this Hubatu F75 three-mode mechanical keyboard is definitely a choice not to be missed.

Well, the above is the whole content of this article, thank you for reading!